● ha작업) 인체감지 tx,rx 통신 안되는 불량을 Vcc,GND,Out만 사용하고 BLE을 재실감지 사용하기

esphome:
  name: esp32-s3-8m-ble2-ip74-pin
  friendly_name: esp32_s3_8m_ble2_ip74_pin

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino
# esp32-s3-8m-pin
api:
  encryption:
    key: "oqKzqRlDdk3NGRwNeb508BRsASdqnz6sAc+Z+ANWvck="

ota:
  password: "2b94a9cd8beed930f72808241e934b3f"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  power_save_mode: LIGHT 
  manual_ip:
    static_ip: 192.168.0.74
    gateway: 192.168.0.1
    subnet: 255.255.255.0
    dns1: 8.8.8.8
    dns2: 8.8.4.4
  ap:
    ssid: "Esp32-S3-Ld2410S"
    password: "EpEGixRy6fQH"


captive_portal:
# ===========================================  # esphome:
# ESP32-S3
# mmwave GPIO2
# tx_pin: GPIO17
# rx_pin: GPIO18
# ===========================================  #

# web_server:
#  port: 80
#  version: 2
#  include_internal: true

logger:
  level: ERROR
  baud_rate: 0
  # level: DEBUG 

uart:
  tx_pin: GPIO17
  rx_pin: GPIO18
  baud_rate: 256000
  parity: NONE
  stop_bits: 1
 

ld2410:
  id: my_ld2410



bluetooth_proxy:
  active: false
  # active: true

esp32_ble_tracker:
  id: entrance_ble_tracker 
  scan_parameters:  # 휴대폰 blu 인식 정보
    interval: 160ms  # 스캔 간격을 더 자주 스캔하도록 변경
    window: 160ms    # 스캔 창을 더 넓게 설정하여 더 많은 장치를 감지할 수 있도록 함
    active: true    # 활성 스캔 활성화
    duration: 30s

# BLE송신기(transmitting)
binary_sensor:
  - platform: ble_presence
    device_class: presence
    ibeacon_uuid: 'a26fbca9-870e-4293-ad0b-aab3e0defc4e'
    name: "9045-BLE"
    id: myphone_9045_ibeacon_presence
    timeout: 60s
    # a26fbca9-870e-4293-ad0b-aab3e0defc4e_100_40004  중에서 _100_40004 제외

  - platform: ble_presence
    device_class: presence
    ibeacon_uuid: '8c592027-1d90-4acf-89e4-5C1644129fb5'
    name: "5763-BLE"
    id: mywife_5763_ibeacon_presence
    timeout: 60s
    # 8c592027-1d90-4acf-89e4-5C1644129fb5_100_40004  중에서 _100_40004 제외

  - platform: ble_presence
    ibeacon_uuid: 'bc2db27c-48f4-4616-a171-82cdbcb4a6aa'
    name: "8655-BLE"
    id: home_phone_8655_ibeacon_presence
    timeout: 60s
    # bc2db27c-48f4-4616-a171-82cdbcb4a6aa_100_40004

# binary_sensor:
  - platform: gpio
    device_class: PRESENCE
    pin:
      number: GPIO2
      mode: INPUT_PULLUP
    name: mmwave_ld2410c_out
    filters:
      - delayed_off: 10ms
    # on_press:
    #  then:
    #    - light.turn_on: PIR_led_output_to
    # on_release:
    #  then:
    #    - light.turn_off: PIR_led_output_to

sensor:
  - platform: ble_rssi
    ibeacon_uuid: 'a26fbca9-870e-4293-ad0b-aab3e0defc4e'
    name: "9045-RSSI"
    id: myphone_9045_ibeacon_rssi

  - platform: ble_rssi
    ibeacon_uuid: '8c592027-1d90-4acf-89e4-5C1644129fb5'
    name: "5763-RSSI"
    id: mywife_5763_ibeacon_rssi

  - platform: ble_rssi
    ibeacon_uuid: 'bc2db27c-48f4-4616-a171-82cdbcb4a6aa'
    name: "8655-RSSI"
    id: home_phone_8655_ibeacon_rssi
   
  # - platform: uptime
  #  name: Uptime Sensor   
# sensor:
 
  - platform: uptime
    name: Uptime Sensor   

  - platform: wifi_signal # Reports the WiFi signal strength/RSSI in dB
    name: "WiFi Signal dB"
    id: wifi_signal_db
    update_interval: 60s
    entity_category: "diagnostic"

  - platform: copy # Reports the WiFi signal strength in %
    source_id: wifi_signal_db
    name: "WiFi Signal Percent"
    filters:
      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
    unit_of_measurement: "Signal %"
    entity_category: "diagnostic"
    device_class: ""


output:
  - platform: ledc
    pin: GPIO4
    id: PIR_led_output
    inverted: true

light:
  - platform: binary
    name: "PIR_to_LED"
    output: PIR_led_output
    id: PIR_led_output_to
    # 2024_0510_2221_53

# light:
  # - platform: esp32_rmt_led_strip
  #  rgb_order: RBG
  #  pin: GPIO48
  #  num_leds: 3
  #  rmt_channel: 2
  #  chipset: ws2812
  #  name: "mmwave_My_Light"
  #  id: RGB_right_sw


switch:
  - platform: restart
    name: "Restart Node"#
    id: restart_id
  - platform: ld2410
    # engineering_mode:
    #  name: "engineering mode"
    bluetooth:
      name: "HLKRadarTool yap control bluetooth"
      #  HLKRadarTool yap
number:
  - platform: ld2410
    timeout:
      name: timeout
    light_threshold:
      name: light threshold
    max_move_distance_gate:
      name: max move distance gate
    max_still_distance_gate:
      name: max still distance gate
     
button:
  - platform: ld2410
    factory_reset:
      name: "factory reset"
    restart:
      name: "restart"
    query_params:
      name: query params

select:
  - platform: ld2410
    distance_resolution:
      name: "distance resolution"
    baud_rate:
      name: "baud rate"
    light_function:
      name: light function
    out_pin_level:
      name: out pin level

text_sensor:
  - platform: ld2410
    version:
      name: "firmware version"
    mac_address:
      name: "mac address"


  - platform: wifi_info
    ip_address:
      name: Address
      id: ip
    ssid:
      name: SSID
    mac_address:
      name: Mac
# 999999999999999999999999999999999999999999

https://esphome.io/components/light/esp32_rmt_led_strip.html#esp32-rmt-led-strip
ESP32 RMT LED Strip
This is a component using the ESP32 RMT peripheral to drive most addressable LED strips.

light:
  - platform: esp32_rmt_led_strip
    rgb_order: GRB
    pin: GPIOXX
    num_leds: 30
    rmt_channel: 0
    chipset: ws2812
    name: "My Light"
Configuration variables
pin (Required, Pin): The pin for the data line of the light.

num_leds (Required, int): The number of LEDs in the strip.

rmt_channel (Required, int): The RMT channel to use. If using multiple strips, you need to use different channels.

ESP32 Variant

Channels

ESP32

0, 1, 2, 3, 4, 5, 6, 7

ESP32-S2

0, 1, 2, 3

ESP32-S3

0, 1, 2, 3

ESP32-C3

0, 1

chipset (Required, enum): The chipset to apply known timings from. Not used if specifying the timings manually, see below.
WS2812

SK6812

APA106

SM16703

rgb_order (Required, string): The RGB order of the strip.
RGB

RBG

GRB

GBR

BGR

BRG

is_rgbw (Optional, boolean): Set to true if the strip is RGBW. Defaults to false.

is_wrgb (Optional, boolean): Set to true if the strip is WRGB. Defaults to false.

max_refresh_rate (Optional, Time): A time interval used to limit the number of commands a light can handle per second. For example 16ms will limit the light to a refresh rate of about 60Hz. Defaults to sending commands as quickly as changes are made to the lights.

All other options from Light.

Manual Timings
These can be used if you know the timings and your chipset is not set above. If you have a new specific chipset, please consider adding support to the codebase and add it to the list above.

bit0_high (Optional, Time): The time to hold the data line high for a 0 bit.

bit0_low (Optional, Time): The time to hold the data line low for a 0 bit.

bit1_high (Optional, Time): The time to hold the data line high for a 1 bit.

bit1_low (Optional, Time): The time to hold the data line low for a 1 bit.

See Also
Light Component

Power Supply Component

API Reference

Edit this page on GitHub