alias: 새로운 자동화_서재불 센서로 스위치on
description: 서재불 센서로 스위치on
trigger:
  - platform: device
    type: turned_on
    device_id: e997aaf3817e8491b53536a20cd6e87c
    entity_id: 4cb34ced863c4e604d0e654bbf7f0326
    domain: light
    for:
      hours: 0
      minutes: 0
      seconds: 1
condition: []
action:
  - choose:
      - conditions: []
        sequence:
          - type: turn_on
            device_id: d9dd4bf3078ddf5e91339c871e01abe2
            entity_id: 70659c4a9c2132d2f4e867af204f7778
            domain: switch
      - conditions:
          - condition: numeric_state
            entity_id: binary_sensor.motion_sensor
            below: 1
        sequence:
          - delay:
              minutes: 5
          - type: turn_off
            device_id: d9dd4bf3078ddf5e91339c871e01abe2
            entity_id: 70659c4a9c2132d2f4e867af204f7778
            domain: switch
mode: single

esphome:
  name: sensor-only
  friendly_name: sensor_only


 
esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: arduino

# Enable logging

logger:
  # level: VERY_VERBOSE
# Enable Home Assistant API
api:
  encryption:
    key: "nxGwadGiDSeD70gQ9r2NQEtdYfEK8Dzs1Q4HUglbFwM="

ota:
  password: "c36f7630154e258a8cf96eeb77c86f49"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  power_save_mode: LIGHT 
  manual_ip:
    static_ip: 192.168.0.114
    gateway: 192.168.0.1
    subnet: 255.255.255.0
    dns1: 8.8.8.8
    dns2: 8.8.4.4
  ap:
    ssid: "Sensor-Only Fallback Hotspot"
    password: "t7ruV7BBiU2i"

captive_portal:

# ====================================================================
output:
  - platform: gpio
    pin: GPIO0
    id: led_output

light:
  - platform: binary
    name: "LED_Sensor_only_GPIO3"
    output: led_output
# wifi 옵션 power_save_mode: LIGHT 적용햐야 컴파일 됩니다esp32_ble_tracker:
esp32_ble_tracker:

binary_sensor:
  - platform: ble_presence
    ibeacon_uuid: 'a26fbca9-870e-4293-ad0b-aab3e0defc4e'
    name: "myphone"

  - platform: ble_presence
    ibeacon_uuid: '7cad13d3-e06e-4493-b771-c2a27e46695c'
    name: "mywife"

  - platform: gpio
    pin: GPIO2
    name: "PIR Sensor"
    device_class: motion
    id: pir_sensor_only_GPIO2
    on_press:
      then:
        - text_sensor.template.publish:
            id: pir_countup
            state: !lambda |-
              static int pir_counter = 0;
              pir_counter++;
              id(pir_last_trigger).publish_state(std::to_string(pir_counter));
              // 매 60분마다 초기화
              if ((millis() / 60000) % 60 == 0) pir_counter = 0;
              return std::to_string(pir_counter);

switch:
  - platform: restart
    name: "Restart Node"
    id: restart_node

  - platform: template
    name: "Reset PIR Sensor Count"
    id: reset_pir_count
    icon: "mdi:refresh"
    turn_on_action:
      - text_sensor.template.publish:
          id: pir_countup
          state: "0"
      - text_sensor.template.publish:
          id: pir_last_trigger
          state: "0"

sensor:

  - platform: uptime
    name: Uptime Sensor 
    update_interval: 1s
    entity_category: "diagnostic"
    id: uptime_sensor

  - platform: wifi_signal
    name: "WiFi Signal dB"
    id: wifi_signal_db
    update_interval: 30s
    entity_category: "diagnostic"

  - platform: copy
    source_id: wifi_signal_db
    name: "WiFi Signal Percent"
    filters:
      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
    unit_of_measurement: "Signal %"
    entity_category: "diagnostic" 

text_sensor:
  - platform: version
    name: "Install restart time ESPHome Version"

  - platform: template
    name: Uptime
    update_interval: 1s
    lambda: |-
      auto s = millis() / 1000;
      return str_snprintf("%02d:%02d:%02d:%02d", 11, s / 86400, s / 3600 % 24, s / 60 % 60, s % 60);

  - platform: template
    name: "PIR Sensor Counter"
    id: pir_countup
  - platform: template
    name: "PIR Last Trigger"
    id: pir_last_trigger

  - platform: template
    name: Uptime_PIR_Off
    update_interval: 1s
    entity_category: diagnostic
    lambda: |-
      static unsigned long last_pir_time = 0;
      if (id(pir_sensor_only_GPIO2).state) {
        last_pir_time = millis();
      }
      unsigned long uptime_seconds = (millis() - last_pir_time) / 1000;
      return esphome::optional<std::string>(std::to_string(uptime_seconds));