●초기설치방법 및 작업 실패) DS920+ / DS1621+ 용 Tinycore 리눅스 이미지 96M 다운로드 설치작업
링크
컨텐츠 정보
- 23,715 조회
- 1 댓글
- 0 추천
- 목록
본문
●초기설치방법 및 작업 실패) DS920+ / DS1621+ 용 Tinycore 리눅스 이미지 96M 다운로드 설치작업
을 초기 설치 작업을 준비했으나 실패 합니다
업그레이드 진행 하니 안되네요
주) ● tinycore-redpill.v0.8.0 빌드 작업)Esxi sever xpenology boot loader tinycore-redpill.v0.8.0.0.img 작업 해야 합니다
중간내용은 기본 설정 준비 초기 작업 내용이며 작업 마지막 실패내용 입니다
https://www.2cpu.co.kr/nas/39419?&sfl=wr_content&stx=%B4%D9%BF%EE%B7%CE%B5%E5&sop=and
https://drive.google.com/file/d/1Jxr0znrDxkqIhcbFPTyll44VwdvuPBu-/view
사용목적은 용량문제로 빌드 불가능해서 적용
▶ Esxi 용 이미지 변환 적용 작업
변환
파일2개 적용
네트워크 설정
부팅후
alt + Ctrl + F1
으로 터미널 모드로 전환
ip 확인
ifconfig
외부 pc에서 ssh 접속 버전 확인
업그레이드 진행 하니 안되네요
./rploader.sh clean
./rploader.sh identifyusb
./rploader.sh serialgen DS3622xs+
./rploader.sh serialgen DS3622xs+ realmac
./rploader.sh satamap
cat user_config.json
유틸 나노에디터 설치
tc@box:~$ cat nano_mc_install.sh
tce-load -w -i nano.tcz
tce-load -w -i mc
tc@box:~$
빌드 테스트
./rploader.sh clean
./rploader.sh serialgends918+
./rploader.sh satamap
nano user_config.json
./rploader.sh listmods apollolake-7.1.0-42661
./rploader.sh listmods apollolake-7.1.0-42661
./rploader.sh ext apollolake-7.1.0-42661 auto
./rploader.sh build apollolake-7.1.0-42661
./rploader.sh build apollolake-7.1.0-42661
./rploader.sh backup
백업
sudo filetool.sh -b
./rploader.sh backup
파일 생성
nano nano_mc_install.sh
nano update_rploader.sh
nano back_up.sh
nano build_apollolake-7.1.0-42661.sh
권한 변경
sudo chmod a+x *.sh
빌드 테스트
./build_apollolake-7.1.0-42661.sh
빌드 내용을 보고 한번더 serialgen 후에 빌드 합니다
nano build_apollolake-7.1.0-42661.sh
다음과 같이 수장후
./rploader.sh clean
./rploader.sh serialgen DS918+
./rploader.sh satamap
nano user_config.json
./rploader.sh listmods apollolake-7.1.0-42661
./rploader.sh listmods apollolake-7.1.0-42661
./rploader.sh ext apollolake-7.1.0-42661 auto
./rploader.sh build apollolake-7.1.0-42661
./rploader.sh build apollolake-7.1.0-42661
./rploader.sh backup
./build_apollolake-7.1.0-42661.sh
빌드 중간에 Esxi 서버 랜인식은
"mac1": "XXYYXXYYXXYY",
변경합니다
변경합니다
기본 랜은 정보
sudo reboot
기본랜 e1000e 랜접속 성공
인식되는 되느 드라이브 없음
vm에서 하드 드라이브를 sata0에서 sata1로 벼경 하자
잔원꺼기후 재부팅
중요한 정보 // 자동으로 인식을 사전 준비하자
1) boot loader는 sata0
2) HDD data는 sata1에 적용
그런데 설치가 안된다,,,실패
재부팅 수정 작업
tc@box:~$ cat 1_ds918p_build_apollolake-7.1.0-42661.sh
./rploader.sh clean
./rploader.sh serialgen DS918+
./rploader.sh satamap
tce-load -w -i nano.tcz
tce-load -w -i mc
nano user_config.json
./rploader.sh listmods apollolake-7.1.0-42661
./rploader.sh ext apollolake-7.1.0-42661 auto
./rploader.sh build apollolake-7.1.0-42661
./rploader.sh clean
sudo rm -rf oldpat.tar.gz
./rploader.sh backup
cat user_config.json
./rploader.sh serialgen DS918+
빌드 파일 수정
{
"extra_cmdline": {
"pid": "0xa4a5",
"vid": "0x0525",
"sn": "1980PDN011792",
"mac1": "XXYYXXYYXXYY",
"SataPortMap": "66",
"DiskIdxMap": "0000"
},
"synoinfo": {
"internalportcfg": "0xffff",
"maxdisks": "16"
},
"ramdisk_copy": {}
}
재빌드
tc@box:~$ cat 1_ds918p_build_apollolake-7.1.0-42661.sh
./rploader.sh clean
./rploader.sh serialgen DS918+
./rploader.sh satamap
tce-load -w -i nano.tcz
tce-load -w -i mc
nano user_config.json
./rploader.sh listmods apollolake-7.1.0-42661
./rploader.sh ext apollolake-7.1.0-42661 auto
./rploader.sh build apollolake-7.1.0-42661
./rploader.sh clean
sudo rm -rf oldpat.tar.gz
./rploader.sh backup
cat user_config.json
./rploader.sh serialgen DS918+
주) 빌드후 문제시 재부팅 재빌드합니다
============ ds918빌드가 않됩니다
===========
주) 실패로 다시 테스트 합니다
결과 실패
=================
이미지 부트로더 재로드 진행
d:\1__redpill_synology_bootloader\2_96m_tinycore-redpill.v0.7.1.7.img\tinycore-redpill.v0.7.1.7.img_v1\tinycore-redpill_v0717-flat.vmdk
d:\1__redpill_synology_bootloader\2_96m_tinycore-redpill.v0.7.1.7.img\tinycore-redpill.v0.7.1.7.img_v1\tinycore-redpill_v0717.vmdk
유틸 나노에디터 설치
tc@box:~$ cat nano_mc_install.sh
tce-load -w -i nano.tcz
tce-load -w -i mc
tc@box:~$
tc@box:~$ nano my_build_update.sh
tc@box:~$ chmod a+x my_build_update.sh
============================
echo " =============================
Posted Saturday at 09:37 PM
Release DS1520+ jun mode m shell.
With @jumkey's help, it's done.
DS1520+ is a 5-bay product with one more disk bay than DS920+.
You can think of it as a similar model to the DS920+.
Like the DS920+, it supports transcoding and is a DTC-based model.
It is a model that can be built only in the M shell.
You can use the build command as below.
./my.sh DS1520+J
For VMs that require additional ext , etc., it is as follows.
./myv.sh DS1520+J
For first-time users, please download and install it in advance as shown below.
======================================== "
curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" --output my.sh.gz; tar -zxvf my.sh.gz;
curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/myv.sh.gz" --output myv.sh.gz; tar -zxvf myv.sh.gz;
ls -lrt m*.sh
==============
tc@box:~$ nano nano_mc_install.sh
tc@box:~$ nano my_build_update.sh
tc@box:~$ chmod a+x *.sh
=================
초기 SSH 터미널 화면 메세지 넣기
===================
nano .profile
에 추가 합니다.
=====================
echo ================================
cat /proc/cpuinfo | grep 'model name'
echo ===============================
cat /proc/meminfo | grep MemTotal
echo ===============================
./rploader.sh
./myv.sh
echo "
===========================
install nano mc htop,,,,,,,,
============================
tce-load -w -i nano.tcz
tce-load -w -i mc
tce-load -w -i htop
nano editor save ctrl + o
nano editor quit ctrl + x
nano editor search F6
============================================================
Ctrl + Alt + F1 : tiny core when booting Terminnal open
ifconfig : ip find
lspci -tvnnq : Hardware list
============================================================
"
☞ https://11q.kr 에 등록된 자료 입니다. ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다♠
관련자료
-
링크
댓글 1
11qkr님의 댓글
echo ============================================
echo nano .profile information
echo ================================
cat /proc/cpuinfo | grep 'model name'
echo ===============================
cat /proc/meminfo | grep MemTotal
echo ===============================
./rploader.sh
./myv.sh
echo "
=====================
SSH Termianl user / passwd
tc / P@ssw0rd 입니다(0은 숫자)
===========================
install nano mc htop,,,,,,,,
============================
tce-load -w -i nano.tcz
tce-load -w -i mc
tce-load -w -i htop
nano editor save ctrl + o
nano editor quit ctrl + x
nano editor search F6
============================================================
Ctrl + Alt + F1 : tiny core when booting Terminnal open
ifconfig : ip find
lspci -tvnnq : Hardware list
============================================================
myv.sh DS920+J Build Processor
===============================
rploader.sh option =========
Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, patchdtc,
satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, postupdate,
mountshare, version, help
myv.sh install ===========
curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" --output my.sh.gz; tar -zxvf my.sh.gz;
curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/myv.sh.gz" --output myv.sh.gz; tar -zxvf myv.sh.gz;
===============================
./rploader.sh clean
./rploader.sh update
cat user_config.json
./rploader.sh serialgen DS920+J
tce-load -w -i nano.tcz
tce-load -w -i mc
tce-load -w -i htop
mac1: XXYYXXYYXXYY
SataPortMap: 66
DiskIdxMap: 0000
nano user_config.json
cp user_config.json user_config.json_DS920+J
./myv.sh DS920+J noconfig
sudo mount /mnt/sda1
nano /mnt/sda1/boot/grub/grub.cfg
cat /mnt/sda1/boot/grub/grub.cfg
sudo filetool.sh -b
./rploader.sh backup
sudo reboot
===============================
============================================================
"
echo nano .profile information
echo ================================
cat /proc/cpuinfo | grep 'model name'
echo ===============================
cat /proc/meminfo | grep MemTotal
echo ===============================
./rploader.sh
./myv.sh
echo "
=====================
SSH Termianl user / passwd
tc / P@ssw0rd 입니다(0은 숫자)
===========================
install nano mc htop,,,,,,,,
============================
tce-load -w -i nano.tcz
tce-load -w -i mc
tce-load -w -i htop
nano editor save ctrl + o
nano editor quit ctrl + x
nano editor search F6
============================================================
Ctrl + Alt + F1 : tiny core when booting Terminnal open
ifconfig : ip find
lspci -tvnnq : Hardware list
============================================================
myv.sh DS920+J Build Processor
===============================
rploader.sh option =========
Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, patchdtc,
satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, postupdate,
mountshare, version, help
myv.sh install ===========
curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" --output my.sh.gz; tar -zxvf my.sh.gz;
curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/myv.sh.gz" --output myv.sh.gz; tar -zxvf myv.sh.gz;
===============================
./rploader.sh clean
./rploader.sh update
cat user_config.json
./rploader.sh serialgen DS920+J
tce-load -w -i nano.tcz
tce-load -w -i mc
tce-load -w -i htop
mac1: XXYYXXYYXXYY
SataPortMap: 66
DiskIdxMap: 0000
nano user_config.json
cp user_config.json user_config.json_DS920+J
./myv.sh DS920+J noconfig
sudo mount /mnt/sda1
nano /mnt/sda1/boot/grub/grub.cfg
cat /mnt/sda1/boot/grub/grub.cfg
sudo filetool.sh -b
./rploader.sh backup
sudo reboot
===============================
============================================================
"