11.Nas_1


새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사


synology shutdown --help

♨ 카랜더 일정 :
  • 링크

  • 첨부

  • 컨텐츠 정보

    본문

    Using username "shimss".

    shimss@192.168.0.6's password:

    shimss@ds918_11qkr:~$ sudo -i

    Password:

    root@ds918_11qkr:~# shutdown --help

    Usage: shutdown [OPTION]... TIME [MESSAGE]

    Bring the system down.


    Options:

      -r                          reboot after shutdown

      -h                          halt or power off after shutdown

      -H                          halt after shutdown (implies -h)

      -P                          power off after shutdown (implies -h)

      -c                          cancel a running shutdown

      -k                          only send warnings, don't shutdown

      -q, --quiet                 reduce output to errors only

      -v, --verbose               increase output to include informational messages

          --help                  display this help and exit

          --version               output version information and exit


    TIME may have different formats, the most common is simply the word 'now' which

    will bring the system down immediately.  Other valid formats are +m, where m is

    the number of minutes to wait until shutting down and hh:mm which specifies the

    time on the 24hr clock.


    Logged in users are warned by a message sent to their terminal, you may include

    an optional MESSAGE included with this.  Messages can be sent without actually

    bringing the system down by using the -k option.


    If TIME is given, the command will remain in the foreground until the shutdown

    occurs.  It can be cancelled by Control-C, or by another user using the -c

    option.


    The system is brought down into maintenance (single-user) mode by default, you

    can change this with either the -r or -h option which specify a reboot or

    system halt respectively.  The -h option can be further modified with -H or -P

    to specify whether to halt the system, or to power it off afterwards.  The

    default is left up to the shutdown scripts.


    Report bugs to <upstart-devel@lists.ubuntu.com>

    root@ds918_11qkr:~#



    ◎ ■ ▶ ☞ ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다. https://11q.kr ♠

    [ 추가 정보 ... 더보기) ]
    뷰PDF 1,2



    office view

    관련자료

    댓글목록

    등록된 댓글이 없습니다.

    목록

    새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사




    Total 1,677 / 12 Page
    [ 리눅스 에서 삭제 안되는 폴더 강제로 삭제하기 ]

    리눅스/시놀로지 에서삭제 안되는 폴더 강제로 삭제하기파일스테이션smb연결파일색제 안되어rm -rf 폴더이름으로 하니 모두 지워졌습니다.예)rm …

    [ ???에서 제공하는 tvheadend 구문 ]

    1. 이용환경 : 설치 기기 / (Docker or Native) 표시  예) 시놀 916+ / 도커  라즈베리파이4 / native  Core…

    [ ● ESxi 스토리지 의 데이터스토어 브라우즈에서 디랙토리 이름변경 은 안되어 터미널 ssh로 변경 가능 … ]

    ●ESxi 스토리지 의 데이터스토어 브라우즈에서 디랙토리 이름변경은 안되어 터미널 ssh로 변경 가능 합니다- 저장폴더 이름을 변경mv 파일1 …

    [ 리눅스/linux cp명령어로 backup cp백업하기 ]

    리눅스/linuxcp명령어로 backup cp백업하기먼저 putty에 실행 합니다cp -airup /volume1/web/g5s /volumeU…

    [ termux를 사용하여 Android에서 http 서버 설정 ]

    termux를 사용하여 Android에서 http 서버 설정SSH 서버 설정고통없이 모든 절차를 수행하려면 물리적 키보드가 있거나 ssh 서버를…

    [ MiBox3-EddyLab에디션 셋탑 Recovery 로 부팅 하기 성공 ] 댓글 1

    MiBox3-EddyLab에디션 셋탑 Recovery 로 부팅 하기카페홈에서 scrcpy 파일 다운로드 디랙토리 작성 복사 합니다https://…

    [ 펌자료)Linux에서 바인드 마운트 및 심볼릭 링크를 사용하는 방법 ]

    Linux에서 바인드 마운트 및 심볼릭 링크를 사용하는 방법Advertisement리눅스에는 많은 평범한 것들이 있습니다.많은 사용자가 그 중 …

    [ 우분투)한번에 끝내는 Ubuntu 웹서버세팅 (우분투 서버세팅) ]

    한번에 끝내는 Ubuntu 웹서버세팅 (우분투 서버세팅)https://blog.lael.be/post/73◎ ■ ▶ ☞ ♠ 정보찾아 공유 드리며…

    [ 무료 SSL 사용 가능한곳 ]

    http://amina.co.kr/bbs/board.php?bo_table=tip&wr_id=4757◎ ■ ▶ ☞ ♠ 정보찾아 공유 드리…


    ♥간단_메모글♥


    최근글


    새댓글



    PHP 안에 HTML ☞ 홈페이지 화면갱신 시간은 ♨
    ▶ 2024-06-29 04:25:39

    오늘의 홈 현황


    • 현재 접속자♨ 548 명
    • 오늘 가입자※ 0 명
    • 어제 가입자※ 4 명
    • 주간 가입자※ 8 명
    • 오늘 방문자 835 명
    • 어제 방문자 2,007 명
    • 최대 방문자 13,042 명
    • 전체 방문자 4,401,997 명
    • 전체 게시물※ 8,663 개
    • 전체 댓글수※ 24,787 개
    • 전체 회원수 11,074 명

    QR코드


    ☞ QR코드 스캔은 kakao앱 자체 QR코드

    알림 0








    최신글↑