11.Nas_1


새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사


Install FFmpeg on Ubuntu 18.04 Bionic Beaver Linux

♨ 카랜더 일정 :
  • 링크

  • 첨부

  • 컨텐츠 정보

    본문

    Objective

    The objective is to Install FFmpeg on Ubuntu 18.04 Bionic Beaver Linux. 

    This guide will provide you with an information on how to install FFmpeg on Ubuntu 18.04 from a standard Ubuntu repository as well as how to install latest FFmpeg by compiling it from a source.

    Operating System and Software Versions

    • Operating System: - Ubuntu 18.04 Bionic Beaver

    Requirements

    Privileged access to your Ubuntu System as root or via sudo command is required.

    Difficulty

    EASY

    Conventions

    • # - requires given linux commands to be executed with root privileges either directly as a root user or by use of sudo command
    • $ - requires given linux commands to be executed as a regular non-privileged user

    Instructions

    Install FFmpeg from Ubuntu Repository

    The easiest way to install FFmpeg on Ubuntu is to use the apt command, open up terminal and enter:
    $ sudo apt install ffmpeg
    
    In most cases you do not need to go any further. To check for a installed ffmpeg version run:
    $ ffmpeg -version
    ffmpeg version 3.4.2-1build1 Copyright (c) 2000-2018 the FFmpeg developers
    
    To see all available FFmpeg's encoders and decoders execute:
    $ ffmpeg -encoders
    $ ffmpeg -decoders
    


    Install FFmpeg from source

    This FFmpeg installation will yield the highest possible FFmpeg and codes versions.

    Prerequisites

    The following linux command will install all FFmpeg compilation prerequisites for Ubuntu 18.04:
     $ sudo apt install -y libopus-dev libmp3lame-dev libfdk-aac-dev libvpx-dev libx264-dev yasm libass-dev libtheora-dev libvorbis-dev mercurial cmake
    
    We will also need libx265-dev development library. However, the version of x256 from Ubuntu's libx265-dev package is lower than expected by latest FFmpeg source code.

    You may try to install libx265-dev using $ sudo apt install libx265-dev and fast forward to compilation. However, if you see ERROR: x265 not found using pkg-confg you will need to compile the x256 library from source using the below commands:
    $ mkdir ~/ffmpeg; cd ~/ffmpeg
    $ hg clone https://bitbucket.org/multicoreware/x265
    $ cd x265/build/linux 
    $ PATH="$HOME/bin:$PATH" cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build" -DENABLE_SHARED:bool=off ../../source && PATH="$HOME/bin:$PATH" 
    $ make && make install
    

    Compile and Install FFmpeg

    Once we have all the prerequisites installed we are now ready to compile FFmpeg. 

    First download the latest FFmpeg source code:
    $ if [ -d ~/ffmpeg ]; then cd ~/ffmpeg; else mkdir ~/ffmpeg && cd ~/ffmpeg; fi
    $ wget -O- http://ffmpeg.org/releases/ffmpeg-snapshot.tar.bz2 | tar xj
    
    Navigate to the newly extracted ffmpeg directory:
    $ cd ~/ffmpeg/ffmpeg
    
    Next, compile and install FFmpeg by coping the below text into your terminal and hitting the ENTERkey. Be patient as this may take some time:

    PATH="$HOME/bin:$PATH" PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" \
       ./configure \
      --prefix="$HOME/ffmpeg_build" \
      --pkg-config-flags="--static" \
      --extra-cflags="-I$HOME/ffmpeg_build/include" \
      --extra-ldflags="-L$HOME/ffmpeg_build/lib" \
      --extra-libs="-lpthread -lm" \
      --bindir="$HOME/bin" \
      --enable-gpl \
      --enable-libass \
      --enable-libfdk-aac \
      --enable-libfreetype \
      --enable-libmp3lame \
      --enable-libopus \
      --enable-libtheora \
      --enable-libvorbis \
      --enable-libvpx \
      --enable-libx264 \
      --enable-libx265 \
      --enable-nonfree && \
    PATH="$HOME/bin:$PATH" make && make install
    
    If successful, your should now have the ffmpeg command available on your Ubuntu system:
    $ ffmpeg -version
    ffmpeg version N-90268-g9fe61b6 Copyright (c) 2000-2018 the FFmpeg developers
    built with gcc 7 (Ubuntu 7.3.0-5ubuntu1)
    
    For additional information on how to remove and update your FFmpeg installation visit https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu
    ARE YOU LOOKING FOR A LINUX JOB?
    Submit your RESUME or create a JOB ALERT on LinuxCareers.com job portal.
    DO YOU NEED ADDITIONAL HELP?
    Get extra help by visiting our LINUX FORUM or simply use comments below.

    ◎ ■ ▶ ☞ ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다. https://11q.kr ♠

    [ 추가 정보 ... 더보기) ]
    뷰PDF 1,2



    office view

    관련자료

    댓글목록

    등록된 댓글이 없습니다.

    목록

    새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사


    • 일간 조회수
        • 게시물이 없습니다.
    • 주간 조회수
        • 게시물이 없습니다.
    • 월간 조회수
        • 게시물이 없습니다.


    Total 1,689 / 4 Page
    [ showdown 다운예약 추가) showdown 으로 드라마 vod 다운로드 설정하기 ]

    showdown다운예약 추가) showdown 으로 드라마 vod 다운로드 설정하기showdown 의 기본 동작에 관련 패키지 동작설정과 드라마…

    [ 추천)구글 TV 플레이어 마켓에서 iptv 시청 플레이 녹화가능하며 타임쉬프트 가능한 progtv.apk … ] 댓글 10

    구글 TV 플레이어 마켓에서 iptv 시청 플레이 녹화가능하며 타임쉬프트 가능한 progtv.apk 추천한글화 버전 파일https://11q.k…

    [ 우분투)18.04 에 tvheadend 설치 windows 10 vmware workstation 15 파… ] 댓글 30

    우분투 18.04 에 tvheadend 설치windows 10 vmware workstation 15 입니다헤놀로지는 트랜스코딩을 못해 사용불가…

    [ nas HDD 를 PC에서 USB로 연결 data 복원하기 UFS Explorer Professional R… ] 댓글 50

    nas HDD 를 PC에서 USB로 연결 data 복원하기 UFS Explorer Professional Recovery간단하게 설치 백업 복원…

    [ 파일삭제)설치순서사진_DS3617xs 6.1 Jun's Mod V1.02a2-alpha_11q.kr_v2_s… ] 댓글 23

    최종 파일 사용하세요성공up)DSM6.1.1에서 DSM6.1.2로 juns-mod-1.02b-ds3615 이용 업데이트 LAN카드 정상 연결 .…

    [ nano edit synology/xpenology vi edit 대응간단 패키지 설치하여 구동하기 ] 댓글 4

    nano edit synology/xpenology vi edit 대응간단 패키지 설치하여 구동하기유닉스 vi 에디터가 불편한 에디터 입니다사용…

    [ fat HDD 형식 ntfs 형식으로 변환하기 ]

    FAT hdd현식은 4gIGA 이하로 COPY 가능핮니가\r\n4GIGS 이상 5GIGA이상 카피 불가능한 파일 NTSC로 HDD형…

    [ 시놀로지 네트워크 백업하기(한 대의 공유기에 NAS 2 ... ]

    ◎ 네이버에서 [https://11q.kr 홈피] 검색 찾아오세요 ◎http://ojos.tistory.com/84\n[이 게시물은 관리자님에 …

    [ linkhard/설치형 개인 간단 웹하드 ] 댓글 3

    ♥\r\n내컴퓨터를 세상에 링크하기. 설치형 웹하드 솔루션 no.1! 링크하드\r\n\r\n\r\n\r\n링크하드 게시판\r\n\r\n링크하드소…

    [ 모바일로 접속시 URL 이동시키기 ]

    \r\n\r\n\r\n\r\n\r\n \r\n\r\n\r\n\r\n\r\n\r\n\r\n 글쓴이 : o하하o \r\n 조회 : 3,773 추천 …

    [ 배추빌더 개인 홈페이지 메인 화면 최신글 및 베너수정 ]

    배추빌더 홈페이지 개인 메인 최신글 수정\r\n은 자기가 사용하는 스킨에서 수정한다w:\mwb\skin\mw.builder\mw.basic.3\…

    [ 배추빌더 하단 메뉴 아이콘 수정 ]

    2012-09-05 22:30:10 , 154 조회\r\n\r\nwritten by 11q.kr관리자\r\n\r\n배추빌더 하단 메뉴 아이콘 수…

    [ 그룹별 게시판 <사이트맵> 만들기 ]

    본문\r\n\r\n오랫만입니다. 예전 g3에서 쓰던 것을 약간 변형하였습니다. 그누보드의 그룹과 게시판의 이름들로 사이트맵을 자동으로 만들어주는…

    [ 가로 메뉴(자동/수동) ]

    \r\n1) 게시판 그룹별 가로 메뉴입니다. 게시판 그룹 단위로 생성된 게시판을 자동으로 불러오게 됩니다. 현재 사용자가 임의로 추가할 수 있는…


    ♥간단_메모글♥


    최근글


    새댓글



    PHP 안에 HTML ☞ 홈페이지 화면갱신 시간은 ♨
    ▶ 2025-07-02 13:11:57

    오늘의 홈 현황


    • 현재 접속자♨ 243 명
    • 오늘 가입자※ 2 명
    • 어제 가입자※ 3 명
    • 주간 가입자※ 10 명
    • 오늘 방문자 1,734 명
    • 어제 방문자 2,638 명
    • 최대 방문자 75,211 명
    • 전체 방문자 6,106,779 명
    • 전체 게시물※ 9,028 개
    • 전체 댓글수※ 25,716 개
    • 전체 회원수 11,726 명

    QR코드


    ☞ QR코드 스캔은 kakao앱 자체 QR코드

    알림 0








    최신글↑