11.Nas_1


새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사


Install FFmpeg on Ubuntu 18.04 Bionic Beaver Linux

♨ 카랜더 일정 :
  • 링크

  • 첨부

  • 컨텐츠 정보

    본문

    Objective

    The objective is to Install FFmpeg on Ubuntu 18.04 Bionic Beaver Linux. 

    This guide will provide you with an information on how to install FFmpeg on Ubuntu 18.04 from a standard Ubuntu repository as well as how to install latest FFmpeg by compiling it from a source.

    Operating System and Software Versions

    • Operating System: - Ubuntu 18.04 Bionic Beaver

    Requirements

    Privileged access to your Ubuntu System as root or via sudo command is required.

    Difficulty

    EASY

    Conventions

    • # - requires given linux commands to be executed with root privileges either directly as a root user or by use of sudo command
    • $ - requires given linux commands to be executed as a regular non-privileged user

    Instructions

    Install FFmpeg from Ubuntu Repository

    The easiest way to install FFmpeg on Ubuntu is to use the apt command, open up terminal and enter:
    $ sudo apt install ffmpeg
    
    In most cases you do not need to go any further. To check for a installed ffmpeg version run:
    $ ffmpeg -version
    ffmpeg version 3.4.2-1build1 Copyright (c) 2000-2018 the FFmpeg developers
    
    To see all available FFmpeg's encoders and decoders execute:
    $ ffmpeg -encoders
    $ ffmpeg -decoders
    


    Install FFmpeg from source

    This FFmpeg installation will yield the highest possible FFmpeg and codes versions.

    Prerequisites

    The following linux command will install all FFmpeg compilation prerequisites for Ubuntu 18.04:
     $ sudo apt install -y libopus-dev libmp3lame-dev libfdk-aac-dev libvpx-dev libx264-dev yasm libass-dev libtheora-dev libvorbis-dev mercurial cmake
    
    We will also need libx265-dev development library. However, the version of x256 from Ubuntu's libx265-dev package is lower than expected by latest FFmpeg source code.

    You may try to install libx265-dev using $ sudo apt install libx265-dev and fast forward to compilation. However, if you see ERROR: x265 not found using pkg-confg you will need to compile the x256 library from source using the below commands:
    $ mkdir ~/ffmpeg; cd ~/ffmpeg
    $ hg clone https://bitbucket.org/multicoreware/x265
    $ cd x265/build/linux 
    $ PATH="$HOME/bin:$PATH" cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build" -DENABLE_SHARED:bool=off ../../source && PATH="$HOME/bin:$PATH" 
    $ make && make install
    

    Compile and Install FFmpeg

    Once we have all the prerequisites installed we are now ready to compile FFmpeg. 

    First download the latest FFmpeg source code:
    $ if [ -d ~/ffmpeg ]; then cd ~/ffmpeg; else mkdir ~/ffmpeg && cd ~/ffmpeg; fi
    $ wget -O- http://ffmpeg.org/releases/ffmpeg-snapshot.tar.bz2 | tar xj
    
    Navigate to the newly extracted ffmpeg directory:
    $ cd ~/ffmpeg/ffmpeg
    
    Next, compile and install FFmpeg by coping the below text into your terminal and hitting the ENTERkey. Be patient as this may take some time:

    PATH="$HOME/bin:$PATH" PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" \
       ./configure \
      --prefix="$HOME/ffmpeg_build" \
      --pkg-config-flags="--static" \
      --extra-cflags="-I$HOME/ffmpeg_build/include" \
      --extra-ldflags="-L$HOME/ffmpeg_build/lib" \
      --extra-libs="-lpthread -lm" \
      --bindir="$HOME/bin" \
      --enable-gpl \
      --enable-libass \
      --enable-libfdk-aac \
      --enable-libfreetype \
      --enable-libmp3lame \
      --enable-libopus \
      --enable-libtheora \
      --enable-libvorbis \
      --enable-libvpx \
      --enable-libx264 \
      --enable-libx265 \
      --enable-nonfree && \
    PATH="$HOME/bin:$PATH" make && make install
    
    If successful, your should now have the ffmpeg command available on your Ubuntu system:
    $ ffmpeg -version
    ffmpeg version N-90268-g9fe61b6 Copyright (c) 2000-2018 the FFmpeg developers
    built with gcc 7 (Ubuntu 7.3.0-5ubuntu1)
    
    For additional information on how to remove and update your FFmpeg installation visit https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu
    ARE YOU LOOKING FOR A LINUX JOB?
    Submit your RESUME or create a JOB ALERT on LinuxCareers.com job portal.
    DO YOU NEED ADDITIONAL HELP?
    Get extra help by visiting our LINUX FORUM or simply use comments below.

    ◎ ■ ▶ ☞ ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다. https://11q.kr ♠

    [ 추가 정보 ... 더보기) ]
    뷰PDF 1,2



    office view

    관련자료

    댓글목록

    등록된 댓글이 없습니다.


    새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사




    Total 1,755 / 46 Page
    [ epg일부 채널 정보 한글깨짐 문의/docker tvheadend조건 ] 댓글 2

    ■일부 채널이 한글 제목이 깨짐니다개선 / 설정 사례 조언 부탁 드립니다▶https://github.com/wonipapa/epg2xml/iss…

    [ docker 이용 tvheadend backup 백업 복원하기 ] 댓글 4

    ■ docker 이용 tvheadend backup 백업 복원하기 입니다 링크1은 처음 설치방법이 자세히 설명 사이트 참조 바랍니다.초기 설치후…

    [ 사운드가 올바른 스피커에서 나오는지 테스트하려면 Dolby 테스트 톤을 다운로드하십시오. ]

    사운드가 올바른 스피커에서 나오는지 테스트하려면 Dolby 테스트 톤을 다운로드하십시오.Windows의 경우1 단계테스트 톤 : Dolby At…

    [ u5pvr 리눅스 펌웨어 진행 준비 webdav tvheadend 백업후 복원까지 정상화 하기 20180… ] 댓글 2

    u5pvr 리눅스 펌웨어 진행 준비 webdav tvheadend 백업후 복원까지 정상화 하기 20180215#백업하기#/home/hts/.ht…

    [ 스마트 에디터 툴바 아이콘 삭제하는 방법 ]

    스마트 에디터 툴바 아이콘 중에서 잘 사용하지 않는 기능들을 삭제하는 방법입니다.모바일 같은 곳에서는 가로 사이즈가 좁기 때문에 일부 아이콘만 …

    [ [11q.kr/g5 수정 _test 서버 검증]댓글에 위지윅 에디터 붙이기(스마트에디터2) ] 댓글 6

    [11q.kr/g5 수정 _test 서버 검증]댓글에 위지윅 에디터 붙이기(스마트에디터2)적용버전 [보안패치]그누보드 5.2.9.8.1 버전 사…

    [ 상단으로가기 메뉴버튼 만들기 ]

    https://sir.kr/g5_tip/3901-------------------------------------- ♠ 출처는 링크 참조 바랍니…

    [ CSS3 미디어쿼리와 스크린 경계 > 퍼블리싱강좌 ]

    우선 해야할 일반응형 웹을 하기 위해서 기본적으로 설정/선언하거나 포함해야 할 항목들이 있습니다.viewport meta tag 설정요약아래코드…

    [ 해결)상단 대문 HomePC.11q.kr 과 아미나 메인 홈 아이콘 클릭시 자바스크립트 아이콘 블러오지 못하… ] 댓글 7

    해결)상단 대문 HomePC.11q.kr 과 아미나 메인 홈 아이콘 클릭시 자바스크립트 아이콘 블러오지 못하는 문제 https:// 적용후 아미…

    [ 배추스킨에 글작성 메뉴에 작성완료버튼 취소 버튼 추가로 PC모드 모바일모드 메뉴 추가 ]

    배추스킨에 글작성 메뉴에 작성완료 버튼 , 취소 버튼 추가로 PC모드 모바일모드 메뉴 추가적용파일 :w:\g5s\skin\board\miwit3…

    [ pc에서 windows용 plex설치 하여 pc폴더와 u5pvr 구글안드로이드 tv 영화 라이브러리 동시 … ]

    pc에서 windows용 plex설치 하여 pc폴더와 u5pvr 구글안드로이드 tv 영화 라이브러리 동시 사용및 플러그인 설치 방법 메뉴얼ht…


    ♥간단_메모글♥


    최근글


    새댓글



    PHP 안에 HTML ☞ 홈페이지 화면갱신 시간은 ♨
    ▶ 2024-06-16 21:23:17

    오늘의 홈 현황


    • 현재 접속자♨ 530 명
    • 오늘 가입자※ 0 명
    • 어제 가입자※ 3 명
    • 주간 가입자※ 24 명
    • 오늘 방문자 1,750 명
    • 어제 방문자 1,320 명
    • 최대 방문자 13,042 명
    • 전체 방문자 4,381,537 명
    • 전체 게시물※ 8,637 개
    • 전체 댓글수※ 24,742 개
    • 전체 회원수 11,051 명

    QR코드


    ☞ QR코드 스캔은 kakao앱 자체 QR코드

    알림 0








    최신글↑