11.Nas_1


새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사


Install FFmpeg on Ubuntu 18.04 Bionic Beaver Linux

♨ 카랜더 일정 :
  • 링크

  • 첨부

  • 컨텐츠 정보

    본문

    Objective

    The objective is to Install FFmpeg on Ubuntu 18.04 Bionic Beaver Linux. 

    This guide will provide you with an information on how to install FFmpeg on Ubuntu 18.04 from a standard Ubuntu repository as well as how to install latest FFmpeg by compiling it from a source.

    Operating System and Software Versions

    • Operating System: - Ubuntu 18.04 Bionic Beaver

    Requirements

    Privileged access to your Ubuntu System as root or via sudo command is required.

    Difficulty

    EASY

    Conventions

    • # - requires given linux commands to be executed with root privileges either directly as a root user or by use of sudo command
    • $ - requires given linux commands to be executed as a regular non-privileged user

    Instructions

    Install FFmpeg from Ubuntu Repository

    The easiest way to install FFmpeg on Ubuntu is to use the apt command, open up terminal and enter:
    $ sudo apt install ffmpeg
    
    In most cases you do not need to go any further. To check for a installed ffmpeg version run:
    $ ffmpeg -version
    ffmpeg version 3.4.2-1build1 Copyright (c) 2000-2018 the FFmpeg developers
    
    To see all available FFmpeg's encoders and decoders execute:
    $ ffmpeg -encoders
    $ ffmpeg -decoders
    


    Install FFmpeg from source

    This FFmpeg installation will yield the highest possible FFmpeg and codes versions.

    Prerequisites

    The following linux command will install all FFmpeg compilation prerequisites for Ubuntu 18.04:
     $ sudo apt install -y libopus-dev libmp3lame-dev libfdk-aac-dev libvpx-dev libx264-dev yasm libass-dev libtheora-dev libvorbis-dev mercurial cmake
    
    We will also need libx265-dev development library. However, the version of x256 from Ubuntu's libx265-dev package is lower than expected by latest FFmpeg source code.

    You may try to install libx265-dev using $ sudo apt install libx265-dev and fast forward to compilation. However, if you see ERROR: x265 not found using pkg-confg you will need to compile the x256 library from source using the below commands:
    $ mkdir ~/ffmpeg; cd ~/ffmpeg
    $ hg clone https://bitbucket.org/multicoreware/x265
    $ cd x265/build/linux 
    $ PATH="$HOME/bin:$PATH" cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build" -DENABLE_SHARED:bool=off ../../source && PATH="$HOME/bin:$PATH" 
    $ make && make install
    

    Compile and Install FFmpeg

    Once we have all the prerequisites installed we are now ready to compile FFmpeg. 

    First download the latest FFmpeg source code:
    $ if [ -d ~/ffmpeg ]; then cd ~/ffmpeg; else mkdir ~/ffmpeg && cd ~/ffmpeg; fi
    $ wget -O- http://ffmpeg.org/releases/ffmpeg-snapshot.tar.bz2 | tar xj
    
    Navigate to the newly extracted ffmpeg directory:
    $ cd ~/ffmpeg/ffmpeg
    
    Next, compile and install FFmpeg by coping the below text into your terminal and hitting the ENTERkey. Be patient as this may take some time:

    PATH="$HOME/bin:$PATH" PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" \
       ./configure \
      --prefix="$HOME/ffmpeg_build" \
      --pkg-config-flags="--static" \
      --extra-cflags="-I$HOME/ffmpeg_build/include" \
      --extra-ldflags="-L$HOME/ffmpeg_build/lib" \
      --extra-libs="-lpthread -lm" \
      --bindir="$HOME/bin" \
      --enable-gpl \
      --enable-libass \
      --enable-libfdk-aac \
      --enable-libfreetype \
      --enable-libmp3lame \
      --enable-libopus \
      --enable-libtheora \
      --enable-libvorbis \
      --enable-libvpx \
      --enable-libx264 \
      --enable-libx265 \
      --enable-nonfree && \
    PATH="$HOME/bin:$PATH" make && make install
    
    If successful, your should now have the ffmpeg command available on your Ubuntu system:
    $ ffmpeg -version
    ffmpeg version N-90268-g9fe61b6 Copyright (c) 2000-2018 the FFmpeg developers
    built with gcc 7 (Ubuntu 7.3.0-5ubuntu1)
    
    For additional information on how to remove and update your FFmpeg installation visit https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu
    ARE YOU LOOKING FOR A LINUX JOB?
    Submit your RESUME or create a JOB ALERT on LinuxCareers.com job portal.
    DO YOU NEED ADDITIONAL HELP?
    Get extra help by visiting our LINUX FORUM or simply use comments below.

    ◎ ■ ▶ ☞ ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다. https://11q.kr ♠

    [ 추가 정보 ... 더보기) ]
    뷰PDF 1,2



    office view

    관련자료

    댓글목록

    등록된 댓글이 없습니다.

    목록

    새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사




    Total 1,677 / 52 Page
    [ MyDisk 1.0.0 - 회원 공유 형식의 심플한 웹하드 ]

    ♥◎ 네이버에서 [https://11q.kr 홈피] 검색 찾아오세요 ◎http://sir.co.kr/bbs/board.php?bo_table=g…

    [ 리눅스에서는 몇가지 중요한 명령어들을 사용하는 것이 기본이라 할 수 있습니다 ]

    \r\n웹문서\r\n\r\n[DOC] \r\n\r\n\r\n\r\n리눅스에서는 몇가지 중요한 명령어들을 사용하는 것이 기본이라 할 ...\r\n…

    [ 글쓰기창 에러 cheditor5 추가 /config.php 아래 추가 ]

    // 글쓰기창 에러 cheditor5 추가 /config.php 아래 추가\r\n$g4['cheditor4'] = "cheditor4";\r\n…

    [ [팁소스] 최고 관리자 자동로그인 되게하기_성공 ]

    그누보드는 최고관리자는 자동로그인이 안되게끔 해두었습니다. 타인이 접속할 경우가 없다면 관리자도 자동로그인이 되면 편합니다.common.php …

    [ 아미나 림스모바일 움직인는 gif 추가하기 ]

    .첨부를 아미나 림스모바일에 index.php에 추가\r\n<!-- 베너 또는 그림 추가 불러오기 m/head.php 시작 -->\r…

    [ 관리자 특정게시물 비밀번호 게시 공지 ]

    ..Shims HomePage[https://11q.kr 홈피] .\n[이 게시물은 관리자님에 의해 2013-11-18 21:29:50 11.H…

    [ 하단메뉴 모바일 이동및 로그인 추가 ]

    <!-- 아미나 하단에 login 모바일 이동 추가하기 w:\pc\amina\thema\basic\html\footer.php에서 추가 -…

    [ 갤러리형 최근글 리스트스킨 - basic_gallery ] 댓글 2

    갤러리형 최근글 리스트스킨 - basic_galleryAD한별아빠신고글주소트랙백스크랩00조회391목록2013.04.21 00:30첨부파일 -ba…

    [ 부띠끄 로테이션 최근 게시물 ]

    부띠끄 로테이션 최근 게시물\r\n\r\n\r\n시하\r\n작성일시2011.10.14 00:45:10\r\n조회6,281\r\n댓글70관련링크\…

    [ 최고관리자 자동로그인 가능하게 하기 extend 디렉토리에 추가및 초기자동로그인후 한글깨지고 다시 로당시 이… ]

    \r\n\r\n\r\n\r\n최고관리자 자동로그인 가능하게 하기 extend 디렉토리에 추가및 초기자동로그인후 한글깨지고 다시 로당시 이상무최고…

    [ g4(배추라이트)와 amina v3 스킨/테마 모바일 적용 ]

    g4(배추라이트)와 amina v3 스킨/테마 모바일 적용\r\n\r\n1) 배추 빌더라이트 정상설치\r\n- 주) 아미나테마 적용카피전 아미나…

    [ 그룹 메뉴 시작 // 배추빌더 라이트에서 head.php에서 그룹메뉴시작 다음줄에 아래 추가하면 메뉴 첫번… ]

    <!-- 그룹 메뉴 시작 // 배추빌더 라이트에서 head.php에서 그룹메뉴시작 다음줄에 아래 추가하면 메뉴 첫번째 메인으로 메뉴 추가-…

    [ 웹캠으로 nas 시놀로지에 카메라를 붙이자 ] 댓글 12

    웹캠으로 nas 시놀로지에 카메라를 붙이자http://forum.synology.com/enu/viewtopic.php?p=191016#p191…

    [ pc에서 diskstation web 접속불가 ]

    갑자기 diskstation및 web 홈페이지가 접속 되지 안는다공유기에 80,5000퐅트를 포트 포워드 하면 해결###■ https://11q…

    [ sftp / webftp /Secure FTP Applet Connection reset by peer:so… ]

    11q.kr 는 네이버/구글에서 검색 찾아오세요------------------------------------------------------…

    [ ★★★ 림스 모바일 2.6.3버전 설치 방법 메뉴얼 1월14일 이후 config.php 적용 방법및 저의 홈… ] 댓글 5

    림스 모바일 2.6.3버전 1월14일 이후 config.php 수정 적용 방법1) 수정 1 m폴더 적용 // config.php 가 있는곳의 웹…


    ♥간단_메모글♥


    최근글


    새댓글



    PHP 안에 HTML ☞ 홈페이지 화면갱신 시간은 ♨
    ▶ 2024-06-29 12:45:16

    오늘의 홈 현황


    • 현재 접속자♨ 556 명
    • 오늘 가입자※ 2 명
    • 어제 가입자※ 4 명
    • 주간 가입자※ 8 명
    • 오늘 방문자 1,605 명
    • 어제 방문자 2,007 명
    • 최대 방문자 13,042 명
    • 전체 방문자 4,402,767 명
    • 전체 게시물※ 8,663 개
    • 전체 댓글수※ 24,792 개
    • 전체 회원수 11,076 명

    QR코드


    ☞ QR코드 스캔은 kakao앱 자체 QR코드

    알림 0








    최신글↑