● tinycore build option ./rploader.sh build <platform> static 과 manual ,compile 빌드옵션 차이점

11qkr 쪽지보내기 메일보내기 홈페이지 자기소개 아이디로 검색 전체게시물 작성
192.♡.0.1 아이피
작성일 2022.05.03 22:52

18,527 조회
2 댓글
0 추천
목록

글검색

● tinycore build option ./rploader.sh build <platform> static 과 manual ,compile 빌드옵션 차이점

빌드 스위치에 대한 자동 옵션이 없습니다. 유효한 옵션은 다음과 같습니다.

compile -> redpill-lkm 컴파일 프로세스를 통해 실행(철저하게 테스트되지 않았지만 실패할 가능성이 있음)

static -> redpill 확장의 정적 redpill 모듈을 사용하고 listmodules 함수도 호출합니다.

manual -> redpill 확장의 정적 redpill 모듈을 사용하고 listmodules 기능을 실행하지 않고 수동으로 추가한 확장을 진행합니다.

DTS 패치가 필요한 플랫폼의 경우 DTS 패치를 수동 manual 으로 수행해야 합니다.

default -> static listmodules 함수는 PCI 장치를 나열하고, PCI-ID용 커널 모듈에 대해 modules.alias.4.json.gz를 쿼리하고,

rpext-index.json에서 확장자를 일치 및 추가하려고 시도합니다.

마지막에는 DTS 패치가 필요한 플랫폼의 경우 model.dt도 패치하려고 합니다.

따라서 STATIC은 내가 추가한 ext 드라이버를 추가하고 pci-id를 기반으로 ext 드라이버를 검색하지만

static을 사용하는 것은 builld 명령에 아무것도 추가하지 않는 것과 같습니다. 예: .

example:

./rploader.sh build <platform>

is the same as

./rploader.sh build <platform> static

same end result

==========

tc@box:~$ cat ds3615_simple_basic_build_dsm71.sh
#!/bin/bash
# Made by https://11q.kr
# 2022.04.27
# DS3615xs build
echo Enter ===========  DS3615xs build --- bromolow-7.1.0-42661 ====
cat user_config_ds3615xs_vmdk.json
echo Enter =========== cp user_config_ds3615xs_vmdk.json user_config.json
read answer
cp user_config_ds3615xs_vmdk.json user_config.json
cat user_config.json
echo Enter ===========  build1 =======================
read answer
./rploader.sh clean all
./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh serialgen DS3615xs
./rploader.sh identifyusb now
./rploader.sh satamap now
#(ll run if custom-module -> /mnt/sdb3/auxfiles is missing)
mkdir /mnt/"$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"/auxfiles; sudo ln -s /mnt/"$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"/auxfiles /home/tc/custom-module;
./rploader.sh build bromolow-7.1.0-42661
rm -rf /home/tc/oldpat.tar.gz;./rploader.sh clean now; rm -rf /mnt/"$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"/auxfiles; rm -rf /home/tc/custom-module;  ./rploader.sh backup now;
echo Enter ===========  build2 =======================
read answer
#./rploader.sh update now
#./rploader.sh fullupgrade now
#./rploader.sh serialgen DS3615xs
#./rploader.sh identifyusb now
#./rploader.sh satamap now
ls /home/tc/custom-module/
./lastbuildsystem.sh

echo Enter =========== Normal build2 =======================
read answer
# intel driver install
./rploader.sh ext bromolow-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/vmxnet3/rpext-index.json
./rploader.sh ext bromolow-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8101/rpext-index.json
./rploader.sh ext bromolow-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8125/rpext-index.json
./rploader.sh ext bromolow-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json
./rploader.sh ext bromolow-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000e/rpext-index.json
# real tek  driver install
./rploader.sh ext bromolow-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8168/rpext-index.json
./rploader.sh ext bromolow-7.1.0-42661 add https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json
# ./rploader.sh ext bromolow-7.1.0-42661 auto
echo Enter ============= ./rploader.sh build bromolow-7.1.0-42661 auto
read answer
./rploader.sh build bromolow-7.1.0-42661 
echo Enter ============= cat user_config.json
read answer
cat user_config.json
date
ls  /mnt/sdb3/auxfiles/
echo Enter ============= ./rploader.sh backup now sudo filetool.sh -b
read answer
./rploader.sh backup now
sudo filetool.sh -b
scp /mnt/sda3/mydata.tgz shimss@192.168.0.10:/i:/1__redpill_synology_bootloader/2_RedPill_Tinycore_loader_Backup/
scp /mnt/sda3/auxfiles/*.pat shimss@192.168.0.10:/i:/1__redpill_synology_bootloader/2_RedPill_Tinycore_loader_Backup/
./lastbuildsystem.sh
ls -lrt
./rploader.sh clean all
# =======================
./lastbuildsystem.sh

☞ https://11q.kr 에 등록된 자료 입니다. ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다♠

뷰PDF add1,add2

11qkr 쪽지보내기 메일보내기 홈페이지 자기소개 아이디로 검색 전체게시물
아이피 192.♡.0.1
작성일 2022.05.03 23:00

tc@box:~$ cat grub_cfg_mount.sh
sudo mount /mnt/sda1
cd /mnt/sda1
ls
cd boot
ls
cd grub/
ls
cat grub.cfg

tc@box:~$
======================

11qkr 쪽지보내기 메일보내기 홈페이지 자기소개 아이디로 검색 전체게시물
아이피 192.♡.0.1
작성일 2022.05.03 23:00

tc@box:~$ ./grub_cfg_mount.sh
EFI GRUB_VER boot custom.gz grub_cksum.syno lost+found rd.gz zImage
grub
fonts grub.cfg grubenv i386-pc locale x86_64-efi
#
# ### !!! WARNING - READ ME !!! ###
#
# DO NOT edit this file. This file has been generated automatically by the loader generator.
# If you were asked to use a pre-made image and asked by someone to edit this file DO NOT do it. The only
# supported method of obtaining the loader image is generating it using the loader generator provided.
#

terminal_output console
if serial --unit=0 --speed=115200; then
terminal_input --append serial_com0
terminal_output --append serial_com0
fi

set default="1"
set timeout="5"
set timeout_style="menu"

if [ -s $prefix/grubenv ]; then
load_env --file $prefix/grubenv --skip-sig
set has_env="1"
if [ -n "${saved_entry}" ]; then
set default="${saved_entry}"
fi
else
set has_env="0"
echo "WARN: failed to load env. Default choice will NOT be saved!"
fi

function savedefault {
saved_entry="${chosen}"
save_env --file $prefix/grubenv saved_entry
}

insmod usb_keyboard
insmod part_msdos
insmod ext2
insmod fat
insmod linux
insmod gzio

set gfxmode=auto
insmod vbe
insmod vga

# UEFI
insmod efi_gop
insmod efi_uga

insmod font
if loadfont ${prefix}/unicode.pf2
then
insmod gfxterm
set gfxmode=auto
set gfxpayload=keep
terminal_output gfxterm
fi

menuentry 'RedPill DS3622xs v7.1.0-42661 Beta (USB, Verbose)' {
savedefault
set root=(hd0,msdos1)
echo Loading Linux...
linux /zImage withefi earlyprintk syno_hw_version=DS3622xs+ console=ttyS0,115200n8 netif_num=5 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=XXYYXXYYXXYY sn=2030SQRBZMB2T vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=9
echo Loading initramfs...
initrd /rd.gz /custom.gz
echo Starting kernel with USB boot
}

menuentry 'RedPill DS3622xs v7.1.0-42661 Beta (SATA, Verbose)' {
savedefault
set root=(hd0,msdos1)
echo Loading Linux...
linux /zImage withefi earlyprintk syno_hw_version=DS3622xs+ console=ttyS0,115200n8 netif_num=5 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 synoboot_satadom=1 syno_port_thaw=1 mac1=XXYYXXYYXXYY sn=2030SQRBZMB2T vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=9
echo Loading initramfs...
initrd /rd.gz /custom.gz
echo Starting kernel with SATA boot
}

menuentry 'Tiny Core Image Build' {
savedefault
set root=(hd0,msdos3)
echo Loading Linux...
linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
echo Loading initramfs...
initrd /corepure64.gz
echo Booting TinyCore for loader creation
}
tc@box:~$ ls

terminal_output console
if serial --unit=0 --speed=115200; then
    terminal_input --append serial_com0
    terminal_output --append serial_com0
fi

set default="1"
set timeout="5"
set timeout_style="menu"

if [ -s $prefix/grubenv ]; then
    load_env --file $prefix/grubenv --skip-sig
    set has_env="1"
    if [ -n "${saved_entry}" ]; then
        set default="${saved_entry}"
    fi
else
    set has_env="0"
    echo "WARN: failed to load env. Default choice will NOT be saved!"
fi

function savedefault {
    saved_entry="${chosen}"
    save_env --file $prefix/grubenv saved_entry
}

insmod usb_keyboard
insmod part_msdos
insmod ext2
insmod fat
insmod linux
insmod gzio

set gfxmode=auto
insmod vbe
insmod vga

# UEFI
insmod efi_gop
insmod efi_uga

insmod font
if loadfont ${prefix}/unicode.pf2
then
    insmod gfxterm
    set gfxmode=auto
    set gfxpayload=keep
    terminal_output gfxterm
fi

menuentry 'RedPill DS3622xs v7.1.0-42661 Beta (USB, Verbose)' {
        savedefault
        set root=(hd0,msdos1)
        echo Loading Linux...
        linux /zImage withefi earlyprintk syno_hw_version=DS3622xs+ console=ttyS0,115200n8 netif_num=5 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=XXYYXXYYXXYY sn=2030SQRBZMB2T vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=9
        echo Loading initramfs...
        initrd /rd.gz /custom.gz
        echo Starting kernel with USB boot
}

menuentry 'RedPill DS3622xs v7.1.0-42661 Beta (SATA, Verbose)' {
        savedefault
        set root=(hd0,msdos1)
        echo Loading Linux...
        linux /zImage withefi earlyprintk syno_hw_version=DS3622xs+ console=ttyS0,115200n8 netif_num=5 pid=0x0001 earlycon=uart8250,io,0x3f8,115200n8 synoboot_satadom=1 syno_port_thaw=1 mac1=XXYYXXYYXXYY sn=2030SQRBZMB2T vid=0x46f4 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=9
        echo Loading initramfs...
        initrd /rd.gz /custom.gz
        echo Starting kernel with SATA boot
}

menuentry 'Tiny Core Image Build' {
        savedefault
        set root=(hd0,msdos3)
        echo Loading Linux...
        linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
        echo Loading initramfs...
        initrd /corepure64.gz
        echo Booting TinyCore for loader creation
}
tc@box:~$ ls

로그인한 회원만 댓글 등록이 가능합니다.