11.Nas_1




● 나의 synoinfo.conf 설정 값 확인하여 설정값 변경 작업 준비

♨ 카랜더 일정 : 2021년12월18일
  • 링크

  • 첨부

  • 컨텐츠 정보

    본문

    ● 나의 synoinfo.conf 설정 값 확인하여 설정값 변경 작업 준비

    현재 변경 없이 나의 구성

    어렵네요

    변경내용 grub.cfg 변경만으로  무엇이 잘못 하는것으로 변동이 없네요

    3232235521_1639816668.7712.png

    참조 작업 

    https://blog.dateno1.com/?p=1733

    에서 정보 확인 작업 설정 확인 합니다.

    putty 로  root 유저로 synoinfo.conf 확인하기

     find / -name "synoinfo.*"

     찾아서
     cat /etc/synoinfo.conf | grep cfg
    확인 하면

    root@https11qkr:/# cat /etc/synoinfo.conf | grep cfg
    buzzeroffcfg="0x0"
    esataportcfg="0x0"
    internalportcfg="0x78FF"
    usbportcfg="0x8700"


    
    root@https11qkr:/# find / -name "synoinfo.*"
    /volume1/web/phpini/synoinfo.conf
    /volume1/web/phpini/e/synoinfo.conf
    /var/log/synoinfo.conf.bad
    /etc.defaults/synoinfo.conf
    /etc/synoinfo.conf
    /.old_patch_info/synoinfo.conf
    root@https11qkr:/# cat /etc/synoinfo.conf
    AppleTalk="eth0"
    BS_Thr_Enable="yes"
    BS_Thr_Value="50"
    addport="no"
    allowanonymous="yes"
    arp_ignore="yes"
    audio_support_eq="yes"
    auto_poweroff_timer="0"
    autoblock_attempt_min="5"
    autoblock_attempts="10"
    autoblock_expriedday="0"
    btrfs_default_compression="zstd"
    buzzeroffcfg="0x0"
    buzzeroffen="0xffff"
    cache_advisor_default_size_gb="4096"
    cache_max_total_size_gb="0"
    cache_skip_seq_io_min_num_disk="1"
    cache_support_pin="yes"
    cache_support_skip_seq_io="yes"
    codepage="krn"
    company="synology"
    company_title="Synology"
    configured="yes"
    ddns_reclaim_interval_mins="3"
    ddns_select=""
    ddns_update="no"
    defaultfs="btrfs"
    defgroup="users"
    defquota="5"
    defright="writeable"
    defshare="public"
    disk_inode_warning_percent="0.05"
    disk_swap="static"
    diskcache="on"
    dsmtimeout="15"
    enableRCPower="yes"
    enable_etron_ssc="yes"
    enable_fan_debug="0x0"
    enable_syno_token="yes"
    enable_zram="yes"
    enableguest="no"
    esata_disk_warning_percent="0.1"
    esata_partition_warning_percent="0.1"
    esataportcfg="0x0"
    eth0_mtu="1500"
    eth0_wol_options="g"
    eth1_mtu="1500"
    eth1_wol_options="d"
    eth2_mtu="1500"
    eth2_wol_options="d"
    eth3_mtu="1500"
    eth3_wol_options="d"
    eth4_mtu="1500"
    eth5_mtu="1500"
    eth6_mtu="1500"
    eth7_mtu="1500"
    eunitseq="sdm,sdq"
    frame_options_built_in_allow_url="gofile.me/,find.synology.com/"
    frame_options_deny_url=""
    hostname="DiskStation"
    hostname_alias="SynologyNAS"
    internal_disk_without_led_mask="no"
    internalportcfg="0x78FF"
    iscsi_target_type="lio4x"
    language="def"
    mailfrom="Synology DiskStation"
    maillang="krn"
    manager="Synology DiskStation"
    max_btrfs_snapshots="65536"
    max_c2fs_num="8"
    max_dr_replica="64"
    max_ha_spacecount="64"
    max_iscsiluns="512"
    max_iscsitrgs="256"
    max_snapshot_per_lun="256"
    max_snapshots_per_share="1024"
    max_volumes="1024"
    maxaccounts="16000"
    maxdisks="15"
    maxgroups="512"
    maxlanport="8"
    maxlogsize="64"
    maxprinters="2"
    maxshares="512"
    mem_max_mb="32768"
    mem_min_mb="4096"
    mfp_autotimer="60"
    mfp_manualtimer="300"
    myds_region_api_base_url="https://example.com"
    netbkp="yes"
    ntpdate_period="daily"
    ntpdate_run_client="yes"
    ntpdate_run_server="yes"
    ntpdate_server="time.google.com"
    ntpdate_server_backup=""
    online_help_base_url="http://help.synology.com/"
    package_update_channel="beta"
    pgsql_sys_max_connections="256"
    php_openbasedir_customize="no"
    pkg_source_trust_level="0"
    pkg_term_version="0003"
    pkgupdate_server="https://pkgupdate7.synology.com"
    portmap_admin="no"
    portmap_ftp="no"
    portmap_http="no"
    portmap_http_add="no"
    portmap_netbkp="no"
    portmap_netbkp_encrypt="no"
    printer_driver_host="https://global.download.synology.com/airprint/DSM7.0/latest"
    product="DiskStation"
    pswdprotect="no"
    pushbrowser_server="https://notification.synology.com/web/"
    pushservice_server="https://sns.synology.com/api/"
    redirect_server="https://gofile.me/"
    remain_life_mail_notify_thr_value="5"
    remain_life_show_thr_value="20"
    remain_life_thr_enable="yes"
    remain_life_thr_value="10"
    retain_admin_pwd="no"
    rss_server="http://example.com/null.xml"
    rss_server_ssl="https://example.com/null.xml"
    rss_server_v2="https://update7.synology.com/autoupdate/v2/getList"
    runupnp="no"
    s2s_task_max="16"
    sb_month_left_thres_value="6"
    sb_month_left_warn_enable="yes"
    sdcard_partition_warning_percent="0.05"
    sdcard_warning_percent="0.05"
    sdkversion="no"
    security_version_server="https://update7.synology.com/securityVersion"
    showdisktemperature="yes"
    small_info_path="https://example.com/null"
    smsinterval="1"
    smsneedinterval="no"
    smspass=""
    smsphone1=""
    smsphone2=""
    smsport="80"
    smssepchar="+"
    smsserver="clickatell"
    smsssl="yes"
    smstemplate="https://api.clickatell.com/http/sendmsg?user=@@USER@@&password=@@PASS@@&api_id=3148203&to=@@PHONE@@&text=@@TEXT@@"
    smstest="no"
    smsuser=""
    standby_force="yes"
    standbytimer="0"
    strong_password_enable="yes"
    supplang="enu,cht,chs,krn,tha,ger,fre,ita,spn,jpn,dan,nor,sve,nld,rus,plk,ptb,ptg,hun,trk,csy"
    supportMFP="yes"
    supportMTU="yes"
    supportNFS="yes"
    supportNFSKerberos="yes"
    supportTc="yes"
    supportVLAN="yes"
    support_aesni_intel="yes"
    support_app_privilege="yes"
    support_apparmor="yes"
    support_audio="yes"
    support_auto_poweron="yes"
    support_auto_repair="yes"
    support_btrfs="yes"
    support_buzzer="yes"
    support_c2fs="yes"
    support_cable_overview="no"
    support_chassis_sn="no"
    support_config_swap="yes"
    support_console_port="yes"
    support_diffraid="yes"
    support_directory_service="yes"
    support_disk_compatibility="yes"
    support_disk_hibernation="yes"
    support_disk_latency_monitor="yes"
    support_disk_msgr="yes"
    support_disk_performance_test="yes"
    support_disk_report="yes"
    support_dr_replica="yes"
    support_dr_snap="yes"
    support_dsl_cmd="yes"
    support_ez_internet="yes"
    support_fan="yes"
    support_fan_adjust_dual_mode="yes"
    support_fast_repair="yes"
    support_fw_security="yes"
    support_group="yes"
    support_ha="yes"
    support_hfsplus_rw="yes"
    support_hotspare="yes"
    support_ihm="yes"
    support_img_backupd="yes"
    support_ipsec="yes"
    support_iscsi_btrfs_lun="yes"
    support_iscsi_lunbkp="yes"
    support_iscsi_plugin="yes"
    support_iscsi_target="yes"
    support_iscsi_target_block="no"
    support_led_behavior_v2="yes"
    support_mib="yes"
    support_mib_adv_mode="yes"
    support_mtd_serial="yes"
    support_online_compr_switch="yes"
    support_oob_ctl="no"
    support_ovs="yes"
    support_performance_event="yes"
    support_postgresql_data_checksums="yes"
    support_power_recovery="yes"
    support_power_schedule="yes"
    support_poweroff="yes"
    support_raid_disk_replacement="yes"
    support_raid_dummy_read="yes"
    support_s2s="yes"
    support_s2s_server="yes"
    support_sct_cmd="yes"
    support_share_encryption="yes"
    support_share_quota="yes"
    support_share_snapshot="yes"
    support_share_user_quota="yes"
    support_skip_copy="yes"
    support_spectre_meltdown_mitigation="yes"
    support_ssd_cache="yes"
    support_ssd_related_ui="yes"
    support_ssd_trim="yes"
    support_stgmgmt_task_queue="yes"
    support_storage_mgr="yes"
    support_synoacl="yes"
    support_synodrive_ability="no"
    support_synopkg="yes"
    support_sys_time="yes"
    support_task_scheduler="yes"
    support_timebkp_server="yes"
    support_trim="yes"
    support_vaai="yes"
    support_wdda="yes"
    support_webinstall="yes"
    support_wimax="yes"
    support_wireless="yes"
    support_wireless_number="2"
    support_wol="yes"
    support_wol_but_not_enable_ui="no"
    support_write_cache="yes"
    support_xa="no"
    support_zram="yes"
    supportadt7490="yes"
    supportdcacheui="yes"
    supportddns="yes"
    supportdomain="yes"
    supportext4="yes"
    supportfileindex="yes"
    supportfilestation="yes"
    supporthfsplus="yes"
    supportitunes="yes"
    supportldap="yes"
    supportmediaservice="yes"
    supportmemtest="yes"
    supportmount="yes"
    supportntfswrite="yes"
    supportphoto="yes"
    supportphotopersonal="yes"
    supportquota="yes"
    supportraid="yes"
    supportraidcross="yes"
    supportraidgroup="yes"
    supportrcpower="yes"
    supportrsrcmon="yes"
    supportsmart="yes"
    supportsnapshot="yes"
    supportssh="yes"
    supportstartupd="yes"
    supportsystemperature="yes"
    supportsystempwarning="yes"
    supporttrustdomain="yes"
    supportuart2="yes"
    supportups="yes"
    supportvideostation="yes"
    surveillance_camera_max="75"
    synobios="bromolow"
    sysctl_kernel.sem="250 32000 32 256"
    syslogport="514"
    systemfs="ext4"
    timebkp_max_task="16"
    timezone="Seoul"
    token_invalid_referer="fbsharing,fbdownload"
    token_valid_user_agent=""
    unique="synology_bromolow_3615xs"
    update_server="http://update7.synology.com/"
    update_server_ssl="https://update7.synology.com/"
    updateurl="http://example.com/"
    upgrade_pkg_dsm_notification="yes"
    upnpdevicetype="DiskStation"
    upnpfriendlyname="DiskStation Device"
    upnpmanufacturerurl="http://www.synology.com/"
    upnpmodeldescription="DiskStation UPnP Device"
    upnpmodelname="DS3615xs"
    upnpmodelurl=""
    usb_disk_warning_percent="0.05"
    usb_partition_warning_percent="0.05"
    usbbkp="yes"
    usbcopy="no"
    usbportcfg="0x8700"
    use_reserved_more_gdt="no"
    vender="Synology Inc."
    vpn_conn_max="60"
    vs_version="1.1"
    win98autodisconnect="yes"
    wins="none"
    wol_enabled_options="g"
    dsm_installation_id="77368dfe-3766-4e70-896f-3f68ba4b8f0f"
    rolling_group_id="5875"
    disable_volumes=""
    userpreference_realpath="/volume1/@userpreference"
    smbxferlog="yes"
    install_agent="webinstall"
    ip_country="KR"
    admin_configured="yes"
    usb_standbytimer="0"
    dsm6_upgrade_to_dsm7_done="yes"
    last_admin_login_build="422180"
    upgrade_pkg_email_notification="no"
    enable_pkg_autoupdate_all="no"
    enable_data_collect="no"
    udc_check_state="7.0.1"
    confautobkp_check_state="done"
    mib_check_state="7.0.1GM"
    welcome_hide="yes"
    promotion_hide="yes"
    showpooltab="yes"
    first_admin_login_done="yes"
    user_saw_new_upgrade_setting_toast="1"
    portcheck="yes"
    forget_password_enable="no"
    enable_homeshare_recyclebin="yes"
    userHomeEnable="yes"
    sftpPort="22"
    rsync_sshd_port="22"
    afpxferlog="yes"
    ssh_port="22"
    pkg_def_intall_vol=""
    pushservice_ds_info_updated="no"
    rsync_account="no"
    # Fixed items
    runmediaservice="no"
    # Fixed items
    support_spectre_meltdown_mitigation_full="yes"
    HddEnableDynamicPower="yes"
    group_thread_cnt="auto"
    is_business_model="no"
    support_tutorial="yes"
    support_syno_hybrid_raid="yes"
    supportnvme="yes"
    sdcopy="no"
    autoblock_size_notified="1"
    thumb_conv_quality="high"
    thumb_conv_paused="no"
    thumb_conv_resume_time="0"
    webfm_use_unix_perm="yes"
    enable_list_usergrp="yes"
    enable_view_google="no"
    enable_view_microsoft="no"
    enable_send_email_attachment="no"
    filebrowserxferlog="yes"
    sharing_default_limit="1000"
    FB_SHARING_HTML_SETTING="true"
    FB_SHARING_GOFILE_PROTOCOL="http"
    FB_SHARING_CUSTOM_SETTING="false"
    FB_SHARING_SETTING="all_user"
    FILE_REQUEST_SETTING="all_user"
    smtp_mail_enabled="yes"
    sendnewusermail="yes"
    multi_gateway="yes"
    webdavxferlog="yes"
    # Fixed items
    # Fixed items
    ss_cms="yes"
    supportsurveillance="yes"
    ss_vs="yes"
    ss_sync_event_player="yes"
    # Fixed items
    support_download="yes"
    afp_umask="yes"
    maxdisk="12"
    external_device_support_exfat="yes"
    root@https11qkr:/# cat /etc/synoinfo.conf | grep cfg
    buzzeroffcfg="0x0"
    esataportcfg="0x0"
    internalportcfg="0x78FF"
    usbportcfg="0x8700"
    root@https11qkr:/# history
    

    ▶ /etc/synoinfo.conf 정보확인 입력

    root@https11qkr:/# cat /etc/synoinfo.conf | grep cfg

    buzzeroffcfg="0x0"
    esataportcfg="0x0"
    internalportcfg="0x78FF"
    usbportcfg="0x8700"


    http://zective.com/code/xpenology/

    으로  구성설정을 접속 입력  확인 합니다


    1. /etc/synoinfo.conf
    2. /etc.defaults/synoinfo.conf

    위 2가지 파일 중 하나를 에디터(vi, vim, nano 등)로 열어 다음의 헥사 값을 입력하세요.

    usbportcfg      = "0x"
    esataportcfg    = "0x"
    internalportcfg = "0x"
    확인하기

    16151413121110987654321
    usbportcfg
    esataportcfg
    internalportcfg

    <주의> 제작자는 헥사값을 수정하여 발생되는 모든 결과에 대해 책임이 없습니다.

    원본 헥사값은 항상 백업해 두세요.

    3232235521_1639811125.9184.png

    제공하신 소스를 상기 html 소스를 저의웹사이트에 적용 해 봅니다

    https://11q.kr/Xpenology_SynoInfo/Xpenology_SynoInfo.htm

    3232235521_1639811846.5214.png

    c:\Users\shimss\Downloads\Xpenology_SynoInfo.zip

    파일을 저장 향후 연결 안될시 적용을 위하여  소장 저장 합니다 (파일 이름 변경)

    3232235521_1639811985.6318.png

    링크 내용에서 확인 하니

    ...중략....

    이제 구성 확인 작업은 사이트에  적용하고 값을 확인 할수 있습니다

    확인해보니 설정파일을 수정하면 된다고 해서 수정해봤습니다

    먼저 수정해야하는 파일은

    /etc/synoinfo.conf

    /etc.defaults/synoinfo.conf

    2개입니다

    수정해야할곳은 각각 두곳입니다

    먼저 telnet/ssh로 접속후 sudo -i를 통해 root권한을 얻은후 vi로 해당 파일을 엽니다

    수정해야하는 값은

    esataportcfg

    internalportcfg

    2개입니다 (만일 현제 장착된 디스크의 개수가 maxdisks값으로 지정된걸 다 쓰고 있어서 그걸 초과해야 하는 경우 해당 값을 포함하여 3군데 수정하셔야 합니다)

    먼저 기본값을 메모해둡니다 (DS918+ 기준으로 internal이 0xffff이고, esata가 0x0입니다)

    hex를 수동으로 계산해도 되지만, 간단하게 계산하게 해주는

    ...중략

    상기 정보 입니다

    수정부분)

    내용중에

    다음과 같이 되어야 합니다 (maxdisks가 16인 918+의 기본값 기준으로 다음과 같이 됩니다 /저는 ds3615)
    만일 부트로더용 usb의 grub.cfg의 SataPortMap값이 maxdisks보다 작다면 해당 부분도 수정해주세요

    > SataPortMap값 16 인지 12인지 결정 필요
    k:\1__redpill_synology_bootloader\20211119\lock\grub_3615\grub.cfg 파일 구성에서
    > 기존 SataPortMap=66  를  SataPortMap=>>

    > fdisk -l  내용 구성 확인

    
    root@https11qkr:/# fdisk -l
    Disk /dev/synoboot: 128 MiB, 134217728 bytes, 262144 sectors
    Disk model: TYPE D 3SE
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0xf110ee87
    Device         Boot  Start    End Sectors Size Id Type
    /dev/synoboot1        2048 100351   98304  48M 83 Linux
    /dev/synoboot2      100352 253951  153600  75M 83 Linux
    /dev/synoboot3      253952 262143    8192   4M 83 Linux
    
    Disk /dev/sdc: 900 GiB, 966367641600 bytes, 1887436800 sectors
    Disk model: Virtual SATA Hard Drive
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0x7f9c6a76
    Device     Boot   Start        End    Sectors   Size Id Type
    /dev/sdc1          2048    4982527    4980480   2.4G fd Linux raid autodetect
    /dev/sdc2       4982528    9176831    4194304     2G fd Linux raid autodetect
    /dev/sdc3       9437184 1887231999 1877794816 895.4G fd Linux raid autodetect
    
    Disk /dev/sdd: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
    Disk model: Virtual SATA Hard Drive
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0xd0b63f86
    Device     Boot   Start        End    Sectors  Size Id Type
    /dev/sdd1          2048    4982527    4980480  2.4G fd Linux raid autodetect
    /dev/sdd2       4982528    9176831    4194304    2G fd Linux raid autodetect
    /dev/sdd3       9437184 3906824351 3897387168  1.8T fd Linux raid autodetect
    
    Disk /dev/sde: 594 GiB, 637802643456 bytes, 1245708288 sectors
    Disk model: Virtual SATA Hard Drive
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0x457e19ea
    Device     Boot   Start        End    Sectors   Size Id Type
    /dev/sde1          2048    4982527    4980480   2.4G fd Linux raid autodetect
    /dev/sde2       4982528    9176831    4194304     2G fd Linux raid autodetect
    /dev/sde3       9437184 1245503487 1236066304 589.4G fd Linux raid autodetect
    
    Disk /dev/md0: 2.4 GiB, 2549940224 bytes, 4980352 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/sdu: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
    Disk model: P3 Portable
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: gpt
    Disk identifier: 13B0A4D5-7E9A-4FF3-84F7-B426910FD709
    Device      Start        End    Sectors  Size Type
    /dev/sdu1    2048     616447     614400  300M EFI System
    /dev/sdu2  616448     649215      32768   16M Microsoft reserved
    /dev/sdu3  649216 3907028991 3906379776  1.8T Microsoft basic data
    
    Disk /dev/zram0: 900 MiB, 943718400 bytes, 230400 sectors
    Units: sectors of 1 * 4096 = 4096 bytes
    Sector size (logical/physical): 4096 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    
    Disk /dev/zram1: 900 MiB, 943718400 bytes, 230400 sectors
    Units: sectors of 1 * 4096 = 4096 bytes
    Sector size (logical/physical): 4096 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    
    Disk /dev/zram2: 900 MiB, 943718400 bytes, 230400 sectors
    Units: sectors of 1 * 4096 = 4096 bytes
    Sector size (logical/physical): 4096 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    
    Disk /dev/zram3: 900 MiB, 943718400 bytes, 230400 sectors
    Units: sectors of 1 * 4096 = 4096 bytes
    Sector size (logical/physical): 4096 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    
    Disk /dev/zram4: 900 MiB, 943718400 bytes, 230400 sectors
    Units: sectors of 1 * 4096 = 4096 bytes
    Sector size (logical/physical): 4096 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    
    Disk /dev/zram5: 900 MiB, 943718400 bytes, 230400 sectors
    Units: sectors of 1 * 4096 = 4096 bytes
    Sector size (logical/physical): 4096 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    
    Disk /dev/zram6: 900 MiB, 943718400 bytes, 230400 sectors
    Units: sectors of 1 * 4096 = 4096 bytes
    Sector size (logical/physical): 4096 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    
    Disk /dev/zram7: 900 MiB, 943718400 bytes, 230400 sectors
    Units: sectors of 1 * 4096 = 4096 bytes
    Sector size (logical/physical): 4096 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    
    Disk /dev/md1: 2 GiB, 2147418112 bytes, 4194176 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/md5: 1.8 TiB, 1995461165056 bytes, 3897385088 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/md2: 895.4 GiB, 961429897216 bytes, 1877792768 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/md4: 589.4 GiB, 632864899072 bytes, 1236064256 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/mapper/vg1-syno_vg_reserved_area: 12 MiB, 12582912 bytes, 24576 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/mapper/vg1-volume_1: 895 GiB, 960998932480 bytes, 1876951040 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/mapper/vg4-syno_vg_reserved_area: 12 MiB, 12582912 bytes, 24576 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/mapper/vg4-volume_2: 1.8 TiB, 1995012308992 bytes, 3896508416 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/mapper/vg3-syno_vg_reserved_area: 12 MiB, 12582912 bytes, 24576 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/mapper/vg3-volume_3: 589 GiB, 632433934336 bytes, 1235222528 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/mapper/cachedev_0: 1.8 TiB, 1995012308992 bytes, 3896508416 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/mapper/cachedev_1: 589 GiB, 632433934336 bytes, 1235222528 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    
    Disk /dev/mapper/cachedev_2: 895 GiB, 960998932480 bytes, 1876951040 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    root@https11qkr:/#
    

    ===============

    기타 참조 사이트 링크 정보 ....> hex를 계산는 참조만

    먼저 https://www.binaryhexconverter.com/hex-to-binary-converter등을 써서 지금 현제의 usb값을 2진수로 변환합니다

    다음 해당 2진수값을 다시 https://www.binaryhexconverter.com/binary-to-hex-converter에 붙여넣고 변환해서 hex로 바꿉니다

    =============
    저는 내부 구성만 정리 해봅니다
    기존
    3232235521_1639811846.5214.png

    3232235521_1639814117.4945.png

    새로운 헥사 값입니다.

    1. /etc/synoinfo.conf
    2. /etc.defaults/synoinfo.conf

    위 2가지 파일 모두 다음 값으로 수정하세요.

    usbportcfg="0xf000"
    esataportcfg="0x0"
    internalportcfg="0xfff"

    수정이 모두 완료됐으면 Xpenology 재시작하세요.

    ================

    수정1 테스트 작업 수정

    /etc/synoinfo.conf

    /etc.defaults/synoinfo.conf

    수정2 테스트 작업 수정

    greb.cfg 변경 은 ????

    기존

    DiskIdxMap=00

     SataPortMap=66

    SasIdxMap=0

    조건

    DiskIdxMap=0
    SataPortMap=6
    SasIdxMap=0xffffffff3

    ...변경 없이  관찰.....


    =================

    부팅된 나의 grub.cfg 값

    root@https11qkr:/# cat /proc/cmdline

    BOOT_IMAGE=/zImage DiskIdxMap=00 mac1=XXYYXXYYXXYY netif_num=1 earlycon=uart8250 ,io,0x3f8,115200n8 syno_hdd_powerup_seq=0 synoboot_satadom=1 syno_hdd_detect=0 console=ttyS0,115200n8 sn=1510LWN009000 root=/dev/md0 SataPortMap=66 HddHotplug=0  withefi SasIdxMap=0 syno_hw_version=DS3615xs vender_format_version=2

    root@https11qkr:/#

    --------- 변경전 설정값 ----

    DiskIdxMap=00
    SataPortMap=66
    SasIdxMap=0
    --- 확인작업 ----------

    cat /etc/synoinfo.conf | grep "cfg"


    root@https11qkr:/# cat /etc/synoinfo.conf | grep "cfg"

    buzzeroffcfg="0x0"

    esataportcfg="0x0"

    internalportcfg="0x78FF"

    usbportcfg="0x8700"

    root@https11qkr:/#

    에서 구성 확인
    3232235521_1639825945.8823.png

    3232235521_1639825640.471.png
    ----test1 ---------------
    DiskIdxMap=0
    SataPortMap=6
    SasIdxMap=0xffffffff3
    변경내용 grub.cfg 변경만으로  무엇이 잘못 하는것으로 변동이 없네요

    DiskIdxMap=XXYYZZ(16진수: XX는 첫 번째 컨트롤러의 첫 번째 디스크 위치, YY는 두 번째 컨트롤러의 첫 번째 디스크 위치, ZZ는 세 번째 컨트롤러의 첫 번째 디스크 위치)
    SataPortMap=ABC(십진수: A는 최대값 첫 번째 컨트롤러의 디스크, B는 두 번째 컨트롤러의 최대 디스크, C는 세 번째 컨트롤러의 최대 디스크 수)
    08 이외의 XX 또는 YY 또는 ZZ를 설정  하려면 인터넷에서 Decimal to HEX 변환기 를 사용할 수 있습니다 . 간단한 0-15 변환은 다음과 같습니다.
    https://www.binaryhexconverter.com/decimal-to-hex-converter

    참고 URL: 펌자료 정보

    http://zective.com/code/xpenology/

    https://blog.dateno1.com/?p=1733

    https://menya.tistory.com/24

    https://www.2cpu.co.kr/nas/35777?&sfl=wr_subject%7C%7Cwr_content&stx=DiskIdxMap&sop=and

    [3]: https://gugucomputing.wordpress.com/2018/11/11/experiment-on-sata_args-in-grub-cfg/

    [4]: https://www.2cpu.co.kr/nas/14902?&sfl=wr_content&stx=diskidx&sop=and



     https://11q.kr 에 등록된 자료 입니다. ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다♠1.png

    [ 추가 정보 ... 더보기) ]
    뷰PDF 1,2



    office view

    관련자료

    댓글목록

    profile_image

    11qkr님의 댓글

    11qkr 쪽지보내기 메일보내기 홈페이지 자기소개 아이디로 검색 전체게시물 아이피 (192.♡.0.1) 작성일

    DiskIdxMap=0
    SataPortMap=6
    SasIdxMap=0xffffffff3
    DiskIdxMap=XXYYZZ(16진수: XX는 첫 번째 컨트롤러의 첫 번째 디스크 위치, YY는 두 번째 컨트롤러의 첫 번째 디스크 위치, ZZ는 세 번째 컨트롤러의 첫 번째 디스크 위치)
    SataPortMap=ABC(십진수: A는 최대값 첫 번째 컨트롤러의 디스크, B는 두 번째 컨트롤러의 최대 디스크, C는 세 번째 컨트롤러의 최대 디스크 수)
    08 이외의 XX 또는 YY 또는 ZZ를 설정  하려면 인터넷에서 Decimal to HEX 변환기 를 사용할 수 있습니다 . 간단한 0-15 변환은 다음과 같습니다.
    https://www.binaryhexconverter.com/decimal-to-hex-converter

    DiskIdxMap=XXYYZZ (HEXadecimal number: XX is the location of first disk of 1st controller, YY  is the location of first disk of 2nd controller, ZZ is the location of first disk of 3rd controller)
    SataPortMap=ABC (Decimal number: A is max disks of 1st controller, B is max disks of 2nd controller, C is max disks of 3rd controller)

    if you would like to set XX or YY or ZZ other than 08, you may use Decimal to HEX converter from the internet. The simple 0-15 conversion is listed below:

    profile_image

    11qkr님의 댓글

    11qkr 쪽지보내기 메일보내기 홈페이지 자기소개 아이디로 검색 전체게시물 아이피 (192.♡.0.1) 작성일

    root@https11qkr:/# cat /proc/cmdline
    BOOT_IMAGE=/zImage DiskIdxMap=00 mac1=XXYYXXYYXXYY netif_num=1 earlycon=uart8250                                                  ,io,0x3f8,115200n8 syno_hdd_powerup_seq=0 synoboot_satadom=1 syno_hdd_detect=0 c                                                  onsole=ttyS0,115200n8 sn=1510LWN009000 root=/dev/md0 SataPortMap=66 HddHotplug=0                                                  withefi SasIdxMap=0 syno_hw_version=DS3615xs vender_format_version=2
    root@https11qkr:/#

    profile_image

    11qkr님의 댓글

    11qkr 쪽지보내기 메일보내기 홈페이지 자기소개 아이디로 검색 전체게시물 아이피 (192.♡.0.1) 작성일

    만일 부트로더용 usb의 grub.cfg의 SataPortMap값이 maxdisks보다 작다면 해당 부분도 수정해주세요

    profile_image

    11qkr님의 댓글

    11qkr 쪽지보내기 메일보내기 홈페이지 자기소개 아이디로 검색 전체게시물 아이피 (192.♡.0.1) 작성일

    통통9 2019-05
    https://menya.tistory.com/24
    18베이 헤놀로지(xpenology) 구축기
    천천히 보시면서 따라해 보세요. 제가 헤놀로지 14베이 만들 때 참고한 곳입니다.

    본문 글과 댓글로 하드웨어 구성을 상상하면
    ---------------------------------------------------------------------------
    eslim 내장 레이드 + 9280-24i4e + SSD 2개 + HDD 20개 이상 으로 생각됩니다.
    내장 레이드에 SSD 2개 연결
    추가 레이드(9280-24i4e)에 HDD 20개 연결
    ---------------------------------------------------------------------------

    모두 이렇게 연결되었다 치고, 제가 설치한다치면
    내장 레이드 + 외장 레이드 인식 위해 확장드라이버(extra.lzma) 가 적용된 부트로더 이미지를 사용하고
    부트로더 이미지의 grub.cfg 의 sataportmap=22 (SSD=2개+HDD=20개. 총 22개)로 변경,
    주의 :  헤놀로지 6.x 버전 기준으로 sataportmap 에 달린 HDD, SSD 숫자의 총합만 넣어도 되는 경우 또는
    내부sata+레이드카드 순으로 각각 기입해줘야 하는 경우가 있었습니다. 모두 다 해보고 되는 설정을
    사용하면 됩니다.

    위와 같이 설정 후 만들어진 부팅 USB로
    헤놀로지 설치를 마친 후,
    ssh 를 켜고 접속해 아래 2 파일안에 아래 내용을 적고 재부팅 하면 안 보였던 것들이 모두 보이게 될 겁니다.
    --------------------
    maxdisks="24"    <-----  실제 달린 저장장치들 갯수 보다 더 높은 숫자를 입력. 되도록 달 수 있는 최대 수를 입력
    usbportcfg="0xc00000"    <--- 그냥 따라 적으면 무리 없었음
    esataportcfg="0x0"          <--- 그냥 따라 적으면 무리 없었음
    internalportcfg="0x3fffff"    <--- 그냥 따라 적으면 무리 없었음
    ------------------------

    /etc/synoinfo.conf
    /etc.defaults/synoinfo.conf

    헤놀로지 설치하다 크고 작은 이유로 설치가 되지 않을 수 있습니다.

    잘 해결 되시길 바라며 이만 줄입니다.

    profile_image

    Duynguyen님의 댓글

    no_profile Duynguyen 쪽지보내기 메일보내기 자기소개 아이디로 검색 전체게시물 아이피 (27.♡.48.249) 작성일
    목록



    • 일간 조회수
        • 게시물이 없습니다.
    • 주간 조회수
        • 게시물이 없습니다.
    • 월간 조회수
        • 게시물이 없습니다.


    Total 1,665 / 1 Page
    [ ● syncthing 으로 사진관리 자동백업 설정 재설정 재연결 작업 synology NAS간편 스마트폰 사… ]

    ● syncthing 으로 사진관리 자동백업 설정 재설정 재연결 작업 synology NAS간편 스마트폰 사진 백업- 가장빨리 백업및 pc에서 …

    [ ● dsm 7.2.1 update 해결)시놀로지 업데이트를 위한 시스템 용량이 부족합니다. 이 문서를 참조하… ] 댓글 4

    ● 해결)시놀로지업데이트를 위한 시스템 용량이 부족합니다. 이 문서를 참조하여 문제를 해결하십시오.Synology는 시스템 성능과 안정성이 향상…

    [ ★★ DSM 7.2.1 UP) 새로운 레드필 로더 ARPL(Automated Redpill Loader)로… ] 댓글 16

    ★★ DSM 7.2.1 UP) 새로운 레드필 로더 ARPL(Automated Redpill Loader)로 빌드하기 강력 추천 dsm 7.2.1…

    [ ● 작업) ESXi VM 이미지 백업 내보내기 작업) 호스트 또는 vSphere 클라이언트에서 VM을 내보… ]

    ● 작업) ESXi VM 이미지 백업 내보내기 작업) 호스트 또는 vSphere 클라이언트에서 VM을 내보내고 가져오는 간단한 방법은 무엇입니까…

    [ ● 시놀로지 네트워크 인터페이스 변경 속도가 높은 LAN 포트로 변경 합니다. ]

    ● 시놀로지 네트워크 인터페이스 변경속도가 높은 LAN 포트로 변경 합니다. 요즘 헤놀로지ARPL(Automated Redpill Loader)…

    [ ● Esxi 서버 vm 백업 툴 개방형 가상화 형식 도구(ovftool) 다운로드하여백업(Backup)하고… ] 댓글 1

    ● Esxi 서버 vm 백업 툴개방형 가상화 형식 도구(ovftool) 다운로드하여백업(Backup)하고 복원(Restore)하기방법1) esx…

    [ ★★★ 무료ssl 인증서 시놀로지작업_재설치 검증성공 ) 무료ssl 인증서 자동생성 Nginx Proxy M… ] 댓글 4

    ★★★무료ssl 인증서시놀로지작업_재설치 검증성공 ) 무료ssl 인증서 자동생성 Nginx Proxy Manager 시놀로지 도커에 설치 작업 …

    [ ● 시놀로지작업_성공2_삽질기) 무료ssl 인증서 자동생성/관리자 Nginx Proxy Manager 시놀… ] 댓글 1

    ● 시놀로지작업_성공2_삽질기) 무료ssl 인증서 자동생성/관리자 Nginx Proxy Manager 시놀로지 도커에 설치 작업정리된 작업은★★…

    [ ● 시놀로지작업) NPM 을 이용한 서브도메인 sub.aaa.duckdns.org를 이용한 시놀로지 역방향… ]

    ● 시놀로지작업) NPM 을 이용한 서브도메인 sub.aaa.duckdns.org를 이용한 시놀로지 역방향 프록시 적용 https;// 서브 도…

    [ ● 시놀로지작성) 도커 컨테이너 만들기에서 Web Station을 통해 웹 포털 활성화 ]

    ● 시놀로지작성) 도커컨테이너 만들기에서Web Station을 통해 웹 포털 활성화더이상 사용할 수 있는 노출된 포트가 없습니다. 노출된 포트…

    [ ● ESXi작업)3가지 방법으로 ESXi VM을 백업하는 방법 ]

    ● ESXi작업)3가지 방법으로 ESXi VM을 백업하는 방법작업중지후 내보내기 백업https://www.vinchin.com/en/blog/b…

    [ ● 시놀로지작업) 시놀로지 초기 설치 설정하기 ( 또는 헤놀로지 부트로더 설정후) ]

    ● 시놀로지작업) 시놀로지 초기 설치설정하기 ( 또는 헤놀로지 부트로더 설정후) 시놀로지 초기구입이나 헤놀로지 부트로더 로 부팅후 설정 작업 입…

    [ ★★★ 시놀로지작업) 새로운 레드필 로더 ARPL(Automated Redpill Loader)로 빌드하기 … ] 댓글 8

    ★★★시놀로지작업)새로운 레드필 로더 ARPL(Automated Redpill Loader)로 빌드하기 강력 추천으로 사용버전입니다.모든구성이 …

    [ ● 작업준비)Synology에서 기본인증서는 유료,기타 활용 멀티인증서 사용 ]

    ● 작업준비)Synology에서 기본인증서는 유료,기타 활용 멀티인증서 사용https://svrforum.com/nas/372241letsenc…

    [ ● Synology 시놀로지 NAS SSL 유료인증서 설치/적용 가이드 ]

    ●시놀로지작업)Synology NASSSL 유료인증서 설치/적용 가이드무료 인증서 작업에 아려움이 많습니다서버 설정중 Let's Encrypt …

    [ ● [가비아 매뉴얼] DNS 레코드 설정하기 SSL인증서 cafe24 사용기 및 주의요함 ]

    ●[가비아 매뉴얼] DNS 레코드 설정하기 SSL인증서 cafe24 사용기 어려운 DNS 인지 무료인증서 사용하다 주당 5회 인증서 생성하니 문…

    [ ● 무료 인증서 Let's Encrypt는 동일 ip당 주당 5개의 중복 생성시 인증서 제한이 적용 사… ]

    ● 무료 인증서Let's Encrypt는 동일 ip당주당 5개의 중복 생성시 인증서 제한이 적용 사용못하는 조건이 될 수 있습니다 . 중복 인증…


    ♥간단_메모글♥


    최근글


    새댓글



    PHP 안에 HTML ☞ 홈페이지 화면갱신 시간은 ♨
    ▶ 2024-03-28 19:47:11

    오늘의 홈 현황


    • 현재 접속자♨ 357 명
    • 오늘 가입자※ 3 명
    • 어제 가입자※ 11 명
    • 주간 가입자※ 27 명
    • 오늘 방문자 2,243 명
    • 어제 방문자 2,255 명
    • 최대 방문자 13,042 명
    • 전체 방문자 4,239,577 명
    • 전체 게시물※ 8,481 개
    • 전체 댓글수※ 24,392 개
    • 전체 회원수 10,843 명

    QR코드


    ☞ 사진기로 촬영하시면 방문링크 됩니다

    알림 0








    최신글↑