11.Nas_1




● 시놀로지 dsm 7.0 putty 명령어 systemctl로 저의 시스템 동작상태 및 ??? 명령어를 실행 확인 으로 실행 중지 재시작 명령 만들기

♨ 카랜더 일정 : 2022년01월02일
  • 링크

  • 첨부

  • 컨텐츠 정보

    본문

    시놀로지 dsm 7.0 putty 명령어 systemctl로 저의 시스템 동작상태 및  ??? 명령어를 실행 확인 으로  실행 중지 재시작 명령 만들기
    저의 웹서버 실행은 아래 내용 참조

    pkgctl-WebStation.service  입니다


    웹서버 재시작 명령어는 .service를 제외한 서비스 상태 명령어 입니다.
    systemctl restart pkgctl-WebStation
    의 형식 관련 명령어를 실행 가능 합니다.
    예) systemctl  [start,restart,stop] ????
      start NAME...                   Start (activate) one or more units
      stop NAME...                    Stop (deactivate) one or more units
      reload NAME...                  Reload one or more units
      restart NAME...                 Start or restart one or more units
    ▶ systemctl > systemctl.txt 파일 추출하고 service 부분만 정리 합니다
    관련 명령어를 실행 가능 합니다.
    예) systemctl  [start,restart,stop] ????.service 
    ================
    pkg-apache22.service
    pkg-apache24.service
    pkg-Contacts-apid.service
    pkg-Contacts-pushserver.service
    pkg-Contacts-radicale.service
    pkg-Contacts-task-center.service
    pkg-Docker-dockerd.service
    pkg-Docker-termd.service
    pkg-FileStation-thumbd.service
    pkg-img_backupd.service
    pkg-iscsi.service
    pkg-LogCenter-syslog.service
    pkg-MailServer_mailloggerd.service
    pkg-MailServer_mailserverd.service
    pkg-MailStation_php74_fpm.service
    pkg-rclocal.service
    pkg-ready.service
    pkg-ReplicationService-synobtrfsreplicad.service
    pkg-root-always-reconfigure.service
    pkg-scsi-plugin-server.service
    pkg-scsit-monitor.service
    pkg-synocalendar-notify-daemon.service
    pkg-synocalendar-phpfpm.service
    pkg-synocalendar-protect-pgsql.service
    pkg-synocalendar-pushserver.service
    pkg-synochat-apid.service
    pkg-synochat-msgserver.service
    pkg-synochat-pgbouncer.service
    pkg-synochat-synochatcrond.service
    pkg-synochat-synochatd.service
    pkg-synodl-apid.service
    pkg-SynoFinder-fileindexd.service
    pkg-SynoFinder-synoelasticd.service
    pkg-synoha-bootup-update-package.service
    pkg-SynologyApplicationService-notification_send.service
    pkg-SynologyApplicationService-pgbouncer.service
    pkg-SynologyApplicationService-session_watcher.service
    pkg-SynologyApplicationService-VapidSendServer.service
    pkg-synologydrive-apid.service
    pkg-synologydrive-authd.service
    pkg-synologydrive-clientd.service
    pkg-synologydrive-redis.service
    pkg-synologydrive-syncd.service
    pkg-synologydrive-vmtouchd.service
    pkg-synologydrive-workerd.service
    pkg-SynologyPhotos-apid.service
    pkg-SynologyPhotos-bg-jobd.service
    pkg-SynologyPhotos-check-album.service
    pkg-SynologyPhotos-check-center.service
    pkg-SynologyPhotos-face-extraction.service
    pkg-SynologyPhotos-geocoding.service
    pkg-SynologyPhotos-js-server.service
    pkg-SynologyPhotos-notify-center.service
    pkg-SynologyPhotos-person-clustering.service
    pkg-SynologyPhotos-pgbouncer.service
    pkg-SynologyPhotos-task-center.service
    pkg-SynologyPhotos-thumb.service
    pkg-SynologyPhotos-thumbnail-provider.service
    pkg-synosamba-env-setup.service
    pkg-synosamba-nmbd.service
    pkg-synosamba-smbd.service
    pkg-synosamba-wsdiscoveryd.service
    pkg-synosamba-wstransfer-genconf.service
    pkg-synosamba-wstransferd.service
    pkg-VideoStation-offlineconversiond.service
    pkg-VideoStation-synovideoindexd.service
    pkg-VideoStation-synovideometadatad.service
    pkg-VideoStation-synovideopreprocessd.service
    pkg-VideoStation-synovpcd.service
    pkg-WebStation-fcgiwrap.service
    pkg-WebStation-php72@40e4d6cb-bf06-418d-90cd-57eb892f4be0.service
    pkg-WebStation-php73@b9a41bca-af4e-11e9-9fc0-6335258c6d96.service
    pkg-WebStation-php74@182b445b-6caf-469f-acaa-a763582ba8db.service
    pkg-WebStation-php74@f53dddf0-05a9-4b56-b54c-6eda0fb8c883.service
    pkgctl-ActiveInsight.service
    pkgctl-AntiVirus.service
    pkgctl-Apache2.2.service
    pkgctl-Apache2.4.service
    pkgctl-Calendar.service
    pkgctl-Chat.service
    pkgctl-CodecPack.service
    pkgctl-Contacts.service
    pkgctl-Docker.service
    pkgctl-DocumentViewer.service
    pkgctl-DownloadStation.service
    pkgctl-dsm6-ui-compatible.service
    pkgctl-EmbyServer.service
    pkgctl-exFAT-Free.service
    pkgctl-ffmpeg.service
    pkgctl-FileStation.service
    pkgctl-HybridShare.service
    pkgctl-HyperBackup.service
    pkgctl-HyperBackupVault.service
    pkgctl-LogCenter.service
    pkgctl-MailServer.service
    pkgctl-MailStation.service
    pkgctl-MariaDB10.service
    pkgctl-MinimServer.service
    pkgctl-Node.js_v12.service
    pkgctl-OAuthService.service
    pkgctl-Perl.service
    pkgctl-PHP7.2.service
    pkgctl-PHP7.3.service
    pkgctl-PHP7.4.service
    pkgctl-phpMyAdmin.service
    pkgctl-PlexMediaServer.service
    pkgctl-Python2.service
    pkgctl-python3.service
    pkgctl-ReplicationService.service
    pkgctl-ScsiTarget.service
    pkgctl-SecureSignIn.service
    pkgctl-SMBService.service
    pkgctl-SurveillanceStation.service
    pkgctl-synocli-disk.service
    pkgctl-synocli-file.service
    pkgctl-SynoFinder.service
    pkgctl-SynologyApplicationService.service
    pkgctl-SynologyDrive.service
    pkgctl-SynologyPhotos.service
    pkgctl-TextEditor.service
    pkgctl-VideoStation.service
    pkgctl-Virtualization.service
    pkgctl-WebDAVServer.service
    pkgctl-WebStation.service

    pdf , excel 파일 작업 참조 드립니다


    3232235521_1641130577.1011.png

    root@https11qkr:/# cat systemctl_help.txt
    systemctl [OPTIONS...] {COMMAND} ...
    Query or send control commands to the systemd manager.
      -h --help           Show this help
         --version        Show package version
         --system         Connect to system manager
         --user           Connect to user service manager
      -H --host=[USER@]HOST
                          Operate on remote host
      -M --machine=CONTAINER
                          Operate on local container
      -t --type=TYPE      List units of a particular type
         --state=STATE    List units with particular LOAD or SUB or ACTIVE state
      -p --property=NAME  Show only properties by this name
      -a --all            Show all loaded units/properties, including dead/empty
                          ones. To list all units installed on the system, use
                          the 'list-unit-files' command instead.
      -l --full           Don't ellipsize unit names on output
      -r --recursive      Show unit list of host and local containers
         --reverse        Show reverse dependencies with 'list-dependencies'
         --job-mode=MODE  Specify how to deal with already queued jobs, when
                          queueing a new job
         --show-types     When showing sockets, explicitly show their type
      -i --ignore-inhibitors
                          When shutting down or sleeping, ignore inhibitors
         --kill-who=WHO   Who to send signal to
      -s --signal=SIGNAL  Which signal to send
      -q --quiet          Suppress output
         --no-block       Do not wait until operation finished
         --no-wall        Don't send wall message before halt/power-off/reboot
         --no-reload      Don't reload daemon after en-/dis-abling unit files
         --no-legend      Do not print a legend (column headers and hints)
         --no-pager       Do not pipe output into a pager
         --no-ask-password
                          Do not ask for system passwords
         --global         Enable/disable unit files globally
         --runtime        Enable unit files only temporarily until next reboot
      -f --force          When enabling unit files, override existing symlinks
                          When shutting down, execute action immediately
         --preset-mode=   Apply only enable, only disable, or all presets
         --root=PATH      Enable unit files in the specified root directory
      -n --lines=INTEGER  Number of journal entries to show
      -o --output=STRING  Change journal output mode (short, short-iso,
                                  short-precise, short-monotonic, verbose,
                                  export, json, json-pretty, json-sse, cat)
         --plain          Print unit dependencies as a list instead of a tree
    Unit Commands:
      list-units [PATTERN...]         List loaded units
      list-sockets [PATTERN...]       List loaded sockets ordered by address
      list-timers [PATTERN...]        List loaded timers ordered by next elapse
      start NAME...                   Start (activate) one or more units
      stop NAME...                    Stop (deactivate) one or more units
      reload NAME...                  Reload one or more units
      restart NAME...                 Start or restart one or more units
      try-restart NAME...             Restart one or more units if active
      reload-or-restart NAME...       Reload one or more units if possible,
                                      otherwise start or restart
      reload-or-try-restart NAME...   Reload one or more units if possible,
                                      otherwise restart if active
      isolate NAME                    Start one unit and stop all others
      kill NAME...                    Send signal to processes of a unit
      is-active PATTERN...            Check whether units are active
      is-failed PATTERN...            Check whether units are failed
      status [PATTERN...|PID...]      Show runtime status of one or more units
      show [PATTERN...|JOB...]        Show properties of one or more
                                      units/jobs or the manager
      cat PATTERN...                  Show files and drop-ins of one or more units
      set-property NAME ASSIGNMENT... Sets one or more properties of a unit
      help PATTERN...|PID...          Show manual for one or more units
      reset-failed [PATTERN...]       Reset failed state for all, one, or more
                                      units
      list-dependencies [NAME]        Recursively show units which are required
                                      or wanted by this unit or by which this
                                      unit is required or wanted
    Unit File Commands:
      list-unit-files [PATTERN...]    List installed unit files
      enable NAME...                  Enable one or more unit files
      disable NAME...                 Disable one or more unit files
      reenable NAME...                Reenable one or more unit files
      preset NAME...                  Enable/disable one or more unit files
                                      based on preset configuration
      preset-all                      Enable/disable all unit files based on
                                      preset configuration
      is-enabled NAME...              Check whether unit files are enabled
      mask NAME...                    Mask one or more units
      unmask NAME...                  Unmask one or more units
      link PATH...                    Link one or more units files into
                                      the search path
      add-wants TARGET NAME...        Add 'Wants' dependency for the target
                                      on specified one or more units
      add-requires TARGET NAME...     Add 'Requires' dependency for the target
                                      on specified one or more units
      edit NAME...                    Edit one or more unit files
      get-default                     Get the name of the default target
      set-default NAME                Set the default target
    Machine Commands:
      list-machines [PATTERN...]      List local containers and host
    Job Commands:
      list-jobs [PATTERN...]          List jobs
      cancel [JOB...]                 Cancel all, one, or more jobs
    Snapshot Commands:
      snapshot [NAME]                 Create a snapshot
      delete NAME...                  Remove one or more snapshots
    Environment Commands:
      show-environment                Dump environment
      set-environment NAME=VALUE...   Set one or more environment variables
      unset-environment NAME...       Unset one or more environment variables
      import-environment [NAME...]    Import all or some environment variables
    Manager Lifecycle Commands:
      daemon-reload                   Reload systemd manager configuration
      daemon-reexec                   Reexecute systemd manager
    System Commands:
      is-system-running               Check whether system is fully running
      default                         Enter system default mode
      rescue                          Enter system rescue mode
      emergency                       Enter system emergency mode
      halt                            Shut down and halt the system
      poweroff                        Shut down and power-off the system
      reboot [ARG]                    Shut down and reboot the system
      kexec                           Shut down and reboot the system with kexec
      exit                            Request user instance exit
      switch-root ROOT [INIT]         Change to a different root file system
      suspend                         Suspend the system
      hibernate                       Hibernate the system
      hybrid-sleep                    Hibernate and suspend the system
    root@https11qkr:/#
    - end -
    [ 추가 정보 ... 더보기) ]
    뷰PDF 1,2



    office view

    관련자료

    댓글목록

    profile_image

    체리님의 댓글

    no_profile 체리 쪽지보내기 메일보내기 자기소개 아이디로 검색 전체게시물 아이피 (58.♡.31.2) 작성일

    gg

    profile_image

    ZARD님의 댓글

    no_profile ZARD 쪽지보내기 메일보내기 자기소개 아이디로 검색 전체게시물 아이피 (1.♡.131.8) 작성일

    명령어 덕분에 에러 해결했습니다.




    • 일간 조회수
        • 게시물이 없습니다.
    • 주간 조회수
        • 게시물이 없습니다.
    • 월간 조회수
        • 게시물이 없습니다.


    Total 1,746 / 2 Page
    [ ● ESXi작업)3가지 방법으로 ESXi VM을 백업하는 방법 ]

    ● ESXi작업)3가지 방법으로 ESXi VM을 백업하는 방법작업중지후 내보내기 백업https://www.vinchin.com/en/blog/b…

    [ ● 시놀로지작업) 시놀로지 초기 설치 설정하기 ( 또는 헤놀로지 부트로더 설정후) ]

    ● 시놀로지작업) 시놀로지 초기 설치설정하기 ( 또는 헤놀로지 부트로더 설정후) 시놀로지 초기구입이나 헤놀로지 부트로더 로 부팅후 설정 작업 입…

    [ ★★★ 시놀로지작업) 새로운 레드필 로더 ARPL(Automated Redpill Loader)로 빌드하기 … ] 댓글 8

    ★★★시놀로지작업)새로운 레드필 로더 ARPL(Automated Redpill Loader)로 빌드하기 강력 추천으로 사용버전입니다.모든구성이 …

    [ ● 작업준비)Synology에서 기본인증서는 유료,기타 활용 멀티인증서 사용 ]

    ● 작업준비)Synology에서 기본인증서는 유료,기타 활용 멀티인증서 사용https://svrforum.com/nas/372241letsenc…

    [ ● Synology 시놀로지 NAS SSL 유료인증서 설치/적용 가이드 ]

    ●시놀로지작업)Synology NASSSL 유료인증서 설치/적용 가이드무료 인증서 작업에 아려움이 많습니다서버 설정중 Let's Encrypt …

    [ ● [가비아 매뉴얼] DNS 레코드 설정하기 SSL인증서 cafe24 사용기 및 주의요함 ]

    ●[가비아 매뉴얼] DNS 레코드 설정하기 SSL인증서 cafe24 사용기 어려운 DNS 인지 무료인증서 사용하다 주당 5회 인증서 생성하니 문…

    [ ● 무료 인증서 Let's Encrypt는 동일 ip당 주당 5개의 중복 생성시 인증서 제한이 적용 사… ]

    ● 무료 인증서Let's Encrypt는 동일 ip당주당 5개의 중복 생성시 인증서 제한이 적용 사용못하는 조건이 될 수 있습니다 . 중복 인증…

    [ ●준비_시놀로지 작성) cafe24 개인도메인 설정하기 ]

    ● 시놀로지 작성) cafe24 개인도메인 설정하기https://cwhboy83.tistory.com/18작업 준비 합니다Cafe24호스팅케이알…

    [ ● 시놀로지작업) vmware 사용 virtual machine manager 설치 ]

    ● 시놀로지작업) vmware 사용 virtual machine manager 설치주)저의 사용중인 7.1.1버전에서 설치 불가능초기진행시 호스…

    [ ● 시놀로지작업)동영상 분석 테스트 letsencrypt 업데이트 및 자동 업 데이트 ] 댓글 1

    ● 시놀로지작업)동영상 분석 테스트 letsencrypt 업데이트 및 자동 업 데이트주) 1일 5회이상 발급 안됨,,,,에러 나옴 >>…

    [ ● 시놀로지작업)duckdns.org 바로등록 시놀로지 dsm7.0 에서 등록 사용하기 ] 댓글 1

    ● duckdns.org에서 dns 바로등록 시놀로지 dsm7.0 에서 등록 사용하기등록 상태'생성하기 는 바로 등록 됩니다 > 몇초면 생…

    [ ● [nas] Synology NAS 에서 crontab 사용 방법(사용불가) ]

    ●[nas] Synology NAS 에서 crontab 사용 방법본자료는 동작 하지 않습니다https://llallallall.blogspot.…

    [ ● 시놀로지 ssh 접속시 메세지 문제 ] 댓글 1

    ● 시놀로지 ssh 접속시 메세지 문제Synology strongly advises you not to store your files in an…

    [ ● Network File System으로 로컬 네트워크 내에서 Synology NAS 의 파일에 액세스하는… ]

    ●Network File System으로로컬 네트워크 내에서 Synology NAS 의 파일에 액세스하는 방법(NFS)네트워크 파일 시스템 /N…


    ♥간단_메모글♥


    최근글


    새댓글



    PHP 안에 HTML ☞ 홈페이지 화면갱신 시간은 ♨
    ▶ 2024-03-29 10:58:18

    오늘의 홈 현황


    • 현재 접속자♨ 109(1) 명
    • 오늘 가입자※ 4 명
    • 어제 가입자※ 10 명
    • 주간 가입자※ 29 명
    • 오늘 방문자 1,533 명
    • 어제 방문자 2,611 명
    • 최대 방문자 13,042 명
    • 전체 방문자 4,241,478 명
    • 전체 게시물※ 8,483 개
    • 전체 댓글수※ 24,396 개
    • 전체 회원수 10,848 명

    QR코드


    ☞ 사진기로 촬영하시면 방문링크 됩니다

    알림 0








    최신글↑