11.Nas_1




● 시놀로지 dsm 7.0 putty 명령어 systemctl로 저의 시스템 동작상태 및 ??? 명령어를 실행 확인 으로 실행 중지 재시작 명령 만들기

♨ 카랜더 일정 : 2022년01월02일
  • 링크

  • 첨부

  • 컨텐츠 정보

    본문

    시놀로지 dsm 7.0 putty 명령어 systemctl로 저의 시스템 동작상태 및  ??? 명령어를 실행 확인 으로  실행 중지 재시작 명령 만들기
    저의 웹서버 실행은 아래 내용 참조

    pkgctl-WebStation.service  입니다


    웹서버 재시작 명령어는 .service를 제외한 서비스 상태 명령어 입니다.
    systemctl restart pkgctl-WebStation
    의 형식 관련 명령어를 실행 가능 합니다.
    예) systemctl  [start,restart,stop] ????
      start NAME...                   Start (activate) one or more units
      stop NAME...                    Stop (deactivate) one or more units
      reload NAME...                  Reload one or more units
      restart NAME...                 Start or restart one or more units
    ▶ systemctl > systemctl.txt 파일 추출하고 service 부분만 정리 합니다
    관련 명령어를 실행 가능 합니다.
    예) systemctl  [start,restart,stop] ????.service 
    ================
    pkg-apache22.service
    pkg-apache24.service
    pkg-Contacts-apid.service
    pkg-Contacts-pushserver.service
    pkg-Contacts-radicale.service
    pkg-Contacts-task-center.service
    pkg-Docker-dockerd.service
    pkg-Docker-termd.service
    pkg-FileStation-thumbd.service
    pkg-img_backupd.service
    pkg-iscsi.service
    pkg-LogCenter-syslog.service
    pkg-MailServer_mailloggerd.service
    pkg-MailServer_mailserverd.service
    pkg-MailStation_php74_fpm.service
    pkg-rclocal.service
    pkg-ready.service
    pkg-ReplicationService-synobtrfsreplicad.service
    pkg-root-always-reconfigure.service
    pkg-scsi-plugin-server.service
    pkg-scsit-monitor.service
    pkg-synocalendar-notify-daemon.service
    pkg-synocalendar-phpfpm.service
    pkg-synocalendar-protect-pgsql.service
    pkg-synocalendar-pushserver.service
    pkg-synochat-apid.service
    pkg-synochat-msgserver.service
    pkg-synochat-pgbouncer.service
    pkg-synochat-synochatcrond.service
    pkg-synochat-synochatd.service
    pkg-synodl-apid.service
    pkg-SynoFinder-fileindexd.service
    pkg-SynoFinder-synoelasticd.service
    pkg-synoha-bootup-update-package.service
    pkg-SynologyApplicationService-notification_send.service
    pkg-SynologyApplicationService-pgbouncer.service
    pkg-SynologyApplicationService-session_watcher.service
    pkg-SynologyApplicationService-VapidSendServer.service
    pkg-synologydrive-apid.service
    pkg-synologydrive-authd.service
    pkg-synologydrive-clientd.service
    pkg-synologydrive-redis.service
    pkg-synologydrive-syncd.service
    pkg-synologydrive-vmtouchd.service
    pkg-synologydrive-workerd.service
    pkg-SynologyPhotos-apid.service
    pkg-SynologyPhotos-bg-jobd.service
    pkg-SynologyPhotos-check-album.service
    pkg-SynologyPhotos-check-center.service
    pkg-SynologyPhotos-face-extraction.service
    pkg-SynologyPhotos-geocoding.service
    pkg-SynologyPhotos-js-server.service
    pkg-SynologyPhotos-notify-center.service
    pkg-SynologyPhotos-person-clustering.service
    pkg-SynologyPhotos-pgbouncer.service
    pkg-SynologyPhotos-task-center.service
    pkg-SynologyPhotos-thumb.service
    pkg-SynologyPhotos-thumbnail-provider.service
    pkg-synosamba-env-setup.service
    pkg-synosamba-nmbd.service
    pkg-synosamba-smbd.service
    pkg-synosamba-wsdiscoveryd.service
    pkg-synosamba-wstransfer-genconf.service
    pkg-synosamba-wstransferd.service
    pkg-VideoStation-offlineconversiond.service
    pkg-VideoStation-synovideoindexd.service
    pkg-VideoStation-synovideometadatad.service
    pkg-VideoStation-synovideopreprocessd.service
    pkg-VideoStation-synovpcd.service
    pkg-WebStation-fcgiwrap.service
    pkg-WebStation-php72@40e4d6cb-bf06-418d-90cd-57eb892f4be0.service
    pkg-WebStation-php73@b9a41bca-af4e-11e9-9fc0-6335258c6d96.service
    pkg-WebStation-php74@182b445b-6caf-469f-acaa-a763582ba8db.service
    pkg-WebStation-php74@f53dddf0-05a9-4b56-b54c-6eda0fb8c883.service
    pkgctl-ActiveInsight.service
    pkgctl-AntiVirus.service
    pkgctl-Apache2.2.service
    pkgctl-Apache2.4.service
    pkgctl-Calendar.service
    pkgctl-Chat.service
    pkgctl-CodecPack.service
    pkgctl-Contacts.service
    pkgctl-Docker.service
    pkgctl-DocumentViewer.service
    pkgctl-DownloadStation.service
    pkgctl-dsm6-ui-compatible.service
    pkgctl-EmbyServer.service
    pkgctl-exFAT-Free.service
    pkgctl-ffmpeg.service
    pkgctl-FileStation.service
    pkgctl-HybridShare.service
    pkgctl-HyperBackup.service
    pkgctl-HyperBackupVault.service
    pkgctl-LogCenter.service
    pkgctl-MailServer.service
    pkgctl-MailStation.service
    pkgctl-MariaDB10.service
    pkgctl-MinimServer.service
    pkgctl-Node.js_v12.service
    pkgctl-OAuthService.service
    pkgctl-Perl.service
    pkgctl-PHP7.2.service
    pkgctl-PHP7.3.service
    pkgctl-PHP7.4.service
    pkgctl-phpMyAdmin.service
    pkgctl-PlexMediaServer.service
    pkgctl-Python2.service
    pkgctl-python3.service
    pkgctl-ReplicationService.service
    pkgctl-ScsiTarget.service
    pkgctl-SecureSignIn.service
    pkgctl-SMBService.service
    pkgctl-SurveillanceStation.service
    pkgctl-synocli-disk.service
    pkgctl-synocli-file.service
    pkgctl-SynoFinder.service
    pkgctl-SynologyApplicationService.service
    pkgctl-SynologyDrive.service
    pkgctl-SynologyPhotos.service
    pkgctl-TextEditor.service
    pkgctl-VideoStation.service
    pkgctl-Virtualization.service
    pkgctl-WebDAVServer.service
    pkgctl-WebStation.service

    pdf , excel 파일 작업 참조 드립니다


    3232235521_1641130577.1011.png

    root@https11qkr:/# cat systemctl_help.txt
    systemctl [OPTIONS...] {COMMAND} ...
    Query or send control commands to the systemd manager.
      -h --help           Show this help
         --version        Show package version
         --system         Connect to system manager
         --user           Connect to user service manager
      -H --host=[USER@]HOST
                          Operate on remote host
      -M --machine=CONTAINER
                          Operate on local container
      -t --type=TYPE      List units of a particular type
         --state=STATE    List units with particular LOAD or SUB or ACTIVE state
      -p --property=NAME  Show only properties by this name
      -a --all            Show all loaded units/properties, including dead/empty
                          ones. To list all units installed on the system, use
                          the 'list-unit-files' command instead.
      -l --full           Don't ellipsize unit names on output
      -r --recursive      Show unit list of host and local containers
         --reverse        Show reverse dependencies with 'list-dependencies'
         --job-mode=MODE  Specify how to deal with already queued jobs, when
                          queueing a new job
         --show-types     When showing sockets, explicitly show their type
      -i --ignore-inhibitors
                          When shutting down or sleeping, ignore inhibitors
         --kill-who=WHO   Who to send signal to
      -s --signal=SIGNAL  Which signal to send
      -q --quiet          Suppress output
         --no-block       Do not wait until operation finished
         --no-wall        Don't send wall message before halt/power-off/reboot
         --no-reload      Don't reload daemon after en-/dis-abling unit files
         --no-legend      Do not print a legend (column headers and hints)
         --no-pager       Do not pipe output into a pager
         --no-ask-password
                          Do not ask for system passwords
         --global         Enable/disable unit files globally
         --runtime        Enable unit files only temporarily until next reboot
      -f --force          When enabling unit files, override existing symlinks
                          When shutting down, execute action immediately
         --preset-mode=   Apply only enable, only disable, or all presets
         --root=PATH      Enable unit files in the specified root directory
      -n --lines=INTEGER  Number of journal entries to show
      -o --output=STRING  Change journal output mode (short, short-iso,
                                  short-precise, short-monotonic, verbose,
                                  export, json, json-pretty, json-sse, cat)
         --plain          Print unit dependencies as a list instead of a tree
    Unit Commands:
      list-units [PATTERN...]         List loaded units
      list-sockets [PATTERN...]       List loaded sockets ordered by address
      list-timers [PATTERN...]        List loaded timers ordered by next elapse
      start NAME...                   Start (activate) one or more units
      stop NAME...                    Stop (deactivate) one or more units
      reload NAME...                  Reload one or more units
      restart NAME...                 Start or restart one or more units
      try-restart NAME...             Restart one or more units if active
      reload-or-restart NAME...       Reload one or more units if possible,
                                      otherwise start or restart
      reload-or-try-restart NAME...   Reload one or more units if possible,
                                      otherwise restart if active
      isolate NAME                    Start one unit and stop all others
      kill NAME...                    Send signal to processes of a unit
      is-active PATTERN...            Check whether units are active
      is-failed PATTERN...            Check whether units are failed
      status [PATTERN...|PID...]      Show runtime status of one or more units
      show [PATTERN...|JOB...]        Show properties of one or more
                                      units/jobs or the manager
      cat PATTERN...                  Show files and drop-ins of one or more units
      set-property NAME ASSIGNMENT... Sets one or more properties of a unit
      help PATTERN...|PID...          Show manual for one or more units
      reset-failed [PATTERN...]       Reset failed state for all, one, or more
                                      units
      list-dependencies [NAME]        Recursively show units which are required
                                      or wanted by this unit or by which this
                                      unit is required or wanted
    Unit File Commands:
      list-unit-files [PATTERN...]    List installed unit files
      enable NAME...                  Enable one or more unit files
      disable NAME...                 Disable one or more unit files
      reenable NAME...                Reenable one or more unit files
      preset NAME...                  Enable/disable one or more unit files
                                      based on preset configuration
      preset-all                      Enable/disable all unit files based on
                                      preset configuration
      is-enabled NAME...              Check whether unit files are enabled
      mask NAME...                    Mask one or more units
      unmask NAME...                  Unmask one or more units
      link PATH...                    Link one or more units files into
                                      the search path
      add-wants TARGET NAME...        Add 'Wants' dependency for the target
                                      on specified one or more units
      add-requires TARGET NAME...     Add 'Requires' dependency for the target
                                      on specified one or more units
      edit NAME...                    Edit one or more unit files
      get-default                     Get the name of the default target
      set-default NAME                Set the default target
    Machine Commands:
      list-machines [PATTERN...]      List local containers and host
    Job Commands:
      list-jobs [PATTERN...]          List jobs
      cancel [JOB...]                 Cancel all, one, or more jobs
    Snapshot Commands:
      snapshot [NAME]                 Create a snapshot
      delete NAME...                  Remove one or more snapshots
    Environment Commands:
      show-environment                Dump environment
      set-environment NAME=VALUE...   Set one or more environment variables
      unset-environment NAME...       Unset one or more environment variables
      import-environment [NAME...]    Import all or some environment variables
    Manager Lifecycle Commands:
      daemon-reload                   Reload systemd manager configuration
      daemon-reexec                   Reexecute systemd manager
    System Commands:
      is-system-running               Check whether system is fully running
      default                         Enter system default mode
      rescue                          Enter system rescue mode
      emergency                       Enter system emergency mode
      halt                            Shut down and halt the system
      poweroff                        Shut down and power-off the system
      reboot [ARG]                    Shut down and reboot the system
      kexec                           Shut down and reboot the system with kexec
      exit                            Request user instance exit
      switch-root ROOT [INIT]         Change to a different root file system
      suspend                         Suspend the system
      hibernate                       Hibernate the system
      hybrid-sleep                    Hibernate and suspend the system
    root@https11qkr:/#
    - end -
    [ 추가 정보 ... 더보기) ]
    뷰PDF 1,2



    office view

    관련자료

    댓글목록

    profile_image

    체리님의 댓글

    no_profile 체리 쪽지보내기 메일보내기 자기소개 아이디로 검색 전체게시물 아이피 (58.♡.31.2) 작성일

    gg

    profile_image

    ZARD님의 댓글

    no_profile ZARD 쪽지보내기 메일보내기 자기소개 아이디로 검색 전체게시물 아이피 (1.♡.131.8) 작성일

    명령어 덕분에 에러 해결했습니다.




    • 일간 조회수
        • 게시물이 없습니다.
    • 주간 조회수
        • 게시물이 없습니다.
    • 월간 조회수
        • 게시물이 없습니다.


    Total 1,746 / 53 Page
    [ Malscrmon 0.4 URL 모니터링 ]

    Malscrmon 0.4 URL 모니터링 - Hark의 이것저것 - 티스토리everyhark.tistory.com/1052016. 1. 14. …

    [ XPEnology(해놀로지) 6.1(6.1.1) Jun’s Mod 1.02 Alpha 버전으로 sata 하드… ]

    sata 하드 개수 인식 늘리기 입니다.XPEnology(해놀로지) 6.1(6.1.1) Jun’s Mod 1.02 Alpha 버전으로 설치시 주…

    [ 삭제)XPEnology Jun’s Mod 1.02a 3615xs 랜 드라이버 추가 버전_DSM6.1,6.1… ] 댓글 2

    최종 파일 사용하세요성공up)DSM6.1.1에서 DSM6.1.2로 juns-mod-1.02b-ds3615 이용 업데이트 LAN카드 정상 연결 .…

    [ 해놀로지 WIN10의 VMWARE에서 2개이상 구동 network adapter 2개씩 추가하기 ]

    해놀로지 WIN10의 VMWARE에서 2개이상 구동 network adapter 2개씩 추가하기MAC주소를 다르개 설정하면 됩니다방법은 OSMO…

    [ RAID 볼륨 시스템 파티션 실패함 수정 방법 ]

    RAID 볼륨 시스템 파티션 실패함 수정 방법DSM 새로 설치후 이전 RAID/볼륨을 추가시 시스템 파티션\r\n실패함발생시 수리방법 > …

    [ 추천) ExifPro 이미지 뷰어 및 간단 html album 제작 저장 ] 댓글 1

    HTML 앨범 도구HTML 앨범 도구 (Ctrl + B)를 사용하면 현재 선택된 이미지를 보여주는 HTML 페이지를 생성 할 수 있습니다.HTM…

    [ Acdsee20 HTML Album 만들기 ]

    Acdsee20 HTML Album 만들기 \r\n\r\n--------------------------------------\r\n♠ 출처는 …

    [ 복구)시놀로지 해놀로지 ds3617xs dsm 6.1.1의 시스템 파티션이 충돌 합니다. 실패함 대응 ]

    시놀로지 해놀로지 ds3617xs dsm 6.1.1의 시스템 파티션이 충돌 합니다. 실패함 대응\r\n\r\n위험 메시지\r\n\r\n가급적 신…

    [ 보안) bad 해킹 차단 ip 목록 리스트 14만건 badips 링크 자료와 저의 차단목록 deny-ip-l… ] 댓글 39

    공유기 외부 아이피 차단 < 지속적으로 공유기접속하고 있습니다 > 로그인 정기적으로 확인 차단 바랍니다차단 목록 첨부 20180513…

    [ Piwigo 에서 워터마크 만들기 [사용 유틸 : faststone] ]

    Piwigo 에서 워터마크 만들기 [사용\r\n유틸 : faststone]\r\n\r\n방법 : 검정 바탕에 힌글씨를 캡취하여 바로 편집기에서 …

    [ 시놀로지서버_접속불가_복구작업 헤 시놀로지 서버 작업,네트워크 연결 불가능,볼륨마운트 안됨,기존 HDD복구 … ] 댓글 1

    헤 시놀로지 서버 작업,네트워크 연결 불가능,볼륨마운트 안됨,기존 HDD복구\r\n\r\nDSM6.1.1재설치후 기존 하드 연결 복구 방법\r\…

    [ 우분투(Ubuntu) 16.04 | root 계정으로 로그인하기, root 계정으로 ssh 접속하기 ]

    -우분투(Ubuntu) 16.04 | root 계정으로 로그인하기, root 계정으로 ssh 접속하기우분투(Ubuntu)는 보안상의 이유로 ro…

    [ [Synology Nas] web server 재시작 / 재부팅 명령어 및 각종 환경설정 파일 경로와 쉘 … ]

    시놀로지 아파치 재시작 하고자방법1) 시놀 서버를 재부팅 하고자 한다면 > sudo reboot> purrty 에 접속 실행 합니다방…

    [ 삭제)DSM 6.1.1_SW_UP)헤놀로지 Jun's Mod V1.02-alpha_DS3615/3617xs_… ] 댓글 53

    최종 파일 사용하세요성공up)DSM6.1.1에서 DSM6.1.2로 juns-mod-1.02b-ds3615 이용 업데이트 LAN카드 정상 연결 .…

    [ 그노보드 설치시 시놀로지서버 gd 문제점 대응 ..아것 때문에 3시간 소비 ]

    그노보드 설치시 시놀로지서버 gd 문제점 대응 ..아것 때문에 3시간 소비패티지에서 웹스테이션 php설정 gd 포함 모두 설정 ( dsm 6.1…

    [ SK BTV 광랜/인터넷 단자함 단말/공유기/TV/PC/서버 랜선 연결도 ] 댓글 1

    SK BTV 광랜/인터넷 단자함 단말/공유기/TV/PC/서버 랜선 연결도인터넷 IPTV와 IPTIME공유기 단자함 공유기허브 랜 선 구성도>…

    [ 준비)omvs 프로그램을 이용한 S* (B*v) IPTV 주소 따는 방법 준비 ]

    오! 멀티 캐스트 비디오 스캐너\r\n\r\n무료 비디오 스트리밍 멀티 캐스트 IP 주소를 찾을 수 있습니다! 멀티 캐스트\r\n비디오 스캐너.…


    ♥간단_메모글♥


    최근글


    새댓글



    PHP 안에 HTML ☞ 홈페이지 화면갱신 시간은 ♨
    ▶ 2024-03-29 19:23:49

    오늘의 홈 현황


    • 현재 접속자♨ 125 명
    • 오늘 가입자※ 4 명
    • 어제 가입자※ 10 명
    • 주간 가입자※ 29 명
    • 오늘 방문자 2,579 명
    • 어제 방문자 2,611 명
    • 최대 방문자 13,042 명
    • 전체 방문자 4,242,524 명
    • 전체 게시물※ 8,483 개
    • 전체 댓글수※ 24,397 개
    • 전체 회원수 10,848 명

    QR코드


    ☞ 사진기로 촬영하시면 방문링크 됩니다

    알림 0








    최신글↑