11.Nas_1




● 시놀로지 dsm 7.0 putty 명령어 systemctl로 저의 시스템 동작상태 및 ??? 명령어를 실행 확인 으로 실행 중지 재시작 명령 만들기

♨ 카랜더 일정 : 2022년01월02일
  • 링크

  • 첨부

  • 컨텐츠 정보

    본문

    시놀로지 dsm 7.0 putty 명령어 systemctl로 저의 시스템 동작상태 및  ??? 명령어를 실행 확인 으로  실행 중지 재시작 명령 만들기
    저의 웹서버 실행은 아래 내용 참조

    pkgctl-WebStation.service  입니다


    웹서버 재시작 명령어는 .service를 제외한 서비스 상태 명령어 입니다.
    systemctl restart pkgctl-WebStation
    의 형식 관련 명령어를 실행 가능 합니다.
    예) systemctl  [start,restart,stop] ????
      start NAME...                   Start (activate) one or more units
      stop NAME...                    Stop (deactivate) one or more units
      reload NAME...                  Reload one or more units
      restart NAME...                 Start or restart one or more units
    ▶ systemctl > systemctl.txt 파일 추출하고 service 부분만 정리 합니다
    관련 명령어를 실행 가능 합니다.
    예) systemctl  [start,restart,stop] ????.service 
    ================
    pkg-apache22.service
    pkg-apache24.service
    pkg-Contacts-apid.service
    pkg-Contacts-pushserver.service
    pkg-Contacts-radicale.service
    pkg-Contacts-task-center.service
    pkg-Docker-dockerd.service
    pkg-Docker-termd.service
    pkg-FileStation-thumbd.service
    pkg-img_backupd.service
    pkg-iscsi.service
    pkg-LogCenter-syslog.service
    pkg-MailServer_mailloggerd.service
    pkg-MailServer_mailserverd.service
    pkg-MailStation_php74_fpm.service
    pkg-rclocal.service
    pkg-ready.service
    pkg-ReplicationService-synobtrfsreplicad.service
    pkg-root-always-reconfigure.service
    pkg-scsi-plugin-server.service
    pkg-scsit-monitor.service
    pkg-synocalendar-notify-daemon.service
    pkg-synocalendar-phpfpm.service
    pkg-synocalendar-protect-pgsql.service
    pkg-synocalendar-pushserver.service
    pkg-synochat-apid.service
    pkg-synochat-msgserver.service
    pkg-synochat-pgbouncer.service
    pkg-synochat-synochatcrond.service
    pkg-synochat-synochatd.service
    pkg-synodl-apid.service
    pkg-SynoFinder-fileindexd.service
    pkg-SynoFinder-synoelasticd.service
    pkg-synoha-bootup-update-package.service
    pkg-SynologyApplicationService-notification_send.service
    pkg-SynologyApplicationService-pgbouncer.service
    pkg-SynologyApplicationService-session_watcher.service
    pkg-SynologyApplicationService-VapidSendServer.service
    pkg-synologydrive-apid.service
    pkg-synologydrive-authd.service
    pkg-synologydrive-clientd.service
    pkg-synologydrive-redis.service
    pkg-synologydrive-syncd.service
    pkg-synologydrive-vmtouchd.service
    pkg-synologydrive-workerd.service
    pkg-SynologyPhotos-apid.service
    pkg-SynologyPhotos-bg-jobd.service
    pkg-SynologyPhotos-check-album.service
    pkg-SynologyPhotos-check-center.service
    pkg-SynologyPhotos-face-extraction.service
    pkg-SynologyPhotos-geocoding.service
    pkg-SynologyPhotos-js-server.service
    pkg-SynologyPhotos-notify-center.service
    pkg-SynologyPhotos-person-clustering.service
    pkg-SynologyPhotos-pgbouncer.service
    pkg-SynologyPhotos-task-center.service
    pkg-SynologyPhotos-thumb.service
    pkg-SynologyPhotos-thumbnail-provider.service
    pkg-synosamba-env-setup.service
    pkg-synosamba-nmbd.service
    pkg-synosamba-smbd.service
    pkg-synosamba-wsdiscoveryd.service
    pkg-synosamba-wstransfer-genconf.service
    pkg-synosamba-wstransferd.service
    pkg-VideoStation-offlineconversiond.service
    pkg-VideoStation-synovideoindexd.service
    pkg-VideoStation-synovideometadatad.service
    pkg-VideoStation-synovideopreprocessd.service
    pkg-VideoStation-synovpcd.service
    pkg-WebStation-fcgiwrap.service
    pkg-WebStation-php72@40e4d6cb-bf06-418d-90cd-57eb892f4be0.service
    pkg-WebStation-php73@b9a41bca-af4e-11e9-9fc0-6335258c6d96.service
    pkg-WebStation-php74@182b445b-6caf-469f-acaa-a763582ba8db.service
    pkg-WebStation-php74@f53dddf0-05a9-4b56-b54c-6eda0fb8c883.service
    pkgctl-ActiveInsight.service
    pkgctl-AntiVirus.service
    pkgctl-Apache2.2.service
    pkgctl-Apache2.4.service
    pkgctl-Calendar.service
    pkgctl-Chat.service
    pkgctl-CodecPack.service
    pkgctl-Contacts.service
    pkgctl-Docker.service
    pkgctl-DocumentViewer.service
    pkgctl-DownloadStation.service
    pkgctl-dsm6-ui-compatible.service
    pkgctl-EmbyServer.service
    pkgctl-exFAT-Free.service
    pkgctl-ffmpeg.service
    pkgctl-FileStation.service
    pkgctl-HybridShare.service
    pkgctl-HyperBackup.service
    pkgctl-HyperBackupVault.service
    pkgctl-LogCenter.service
    pkgctl-MailServer.service
    pkgctl-MailStation.service
    pkgctl-MariaDB10.service
    pkgctl-MinimServer.service
    pkgctl-Node.js_v12.service
    pkgctl-OAuthService.service
    pkgctl-Perl.service
    pkgctl-PHP7.2.service
    pkgctl-PHP7.3.service
    pkgctl-PHP7.4.service
    pkgctl-phpMyAdmin.service
    pkgctl-PlexMediaServer.service
    pkgctl-Python2.service
    pkgctl-python3.service
    pkgctl-ReplicationService.service
    pkgctl-ScsiTarget.service
    pkgctl-SecureSignIn.service
    pkgctl-SMBService.service
    pkgctl-SurveillanceStation.service
    pkgctl-synocli-disk.service
    pkgctl-synocli-file.service
    pkgctl-SynoFinder.service
    pkgctl-SynologyApplicationService.service
    pkgctl-SynologyDrive.service
    pkgctl-SynologyPhotos.service
    pkgctl-TextEditor.service
    pkgctl-VideoStation.service
    pkgctl-Virtualization.service
    pkgctl-WebDAVServer.service
    pkgctl-WebStation.service

    pdf , excel 파일 작업 참조 드립니다


    3232235521_1641130577.1011.png

    root@https11qkr:/# cat systemctl_help.txt
    systemctl [OPTIONS...] {COMMAND} ...
    Query or send control commands to the systemd manager.
      -h --help           Show this help
         --version        Show package version
         --system         Connect to system manager
         --user           Connect to user service manager
      -H --host=[USER@]HOST
                          Operate on remote host
      -M --machine=CONTAINER
                          Operate on local container
      -t --type=TYPE      List units of a particular type
         --state=STATE    List units with particular LOAD or SUB or ACTIVE state
      -p --property=NAME  Show only properties by this name
      -a --all            Show all loaded units/properties, including dead/empty
                          ones. To list all units installed on the system, use
                          the 'list-unit-files' command instead.
      -l --full           Don't ellipsize unit names on output
      -r --recursive      Show unit list of host and local containers
         --reverse        Show reverse dependencies with 'list-dependencies'
         --job-mode=MODE  Specify how to deal with already queued jobs, when
                          queueing a new job
         --show-types     When showing sockets, explicitly show their type
      -i --ignore-inhibitors
                          When shutting down or sleeping, ignore inhibitors
         --kill-who=WHO   Who to send signal to
      -s --signal=SIGNAL  Which signal to send
      -q --quiet          Suppress output
         --no-block       Do not wait until operation finished
         --no-wall        Don't send wall message before halt/power-off/reboot
         --no-reload      Don't reload daemon after en-/dis-abling unit files
         --no-legend      Do not print a legend (column headers and hints)
         --no-pager       Do not pipe output into a pager
         --no-ask-password
                          Do not ask for system passwords
         --global         Enable/disable unit files globally
         --runtime        Enable unit files only temporarily until next reboot
      -f --force          When enabling unit files, override existing symlinks
                          When shutting down, execute action immediately
         --preset-mode=   Apply only enable, only disable, or all presets
         --root=PATH      Enable unit files in the specified root directory
      -n --lines=INTEGER  Number of journal entries to show
      -o --output=STRING  Change journal output mode (short, short-iso,
                                  short-precise, short-monotonic, verbose,
                                  export, json, json-pretty, json-sse, cat)
         --plain          Print unit dependencies as a list instead of a tree
    Unit Commands:
      list-units [PATTERN...]         List loaded units
      list-sockets [PATTERN...]       List loaded sockets ordered by address
      list-timers [PATTERN...]        List loaded timers ordered by next elapse
      start NAME...                   Start (activate) one or more units
      stop NAME...                    Stop (deactivate) one or more units
      reload NAME...                  Reload one or more units
      restart NAME...                 Start or restart one or more units
      try-restart NAME...             Restart one or more units if active
      reload-or-restart NAME...       Reload one or more units if possible,
                                      otherwise start or restart
      reload-or-try-restart NAME...   Reload one or more units if possible,
                                      otherwise restart if active
      isolate NAME                    Start one unit and stop all others
      kill NAME...                    Send signal to processes of a unit
      is-active PATTERN...            Check whether units are active
      is-failed PATTERN...            Check whether units are failed
      status [PATTERN...|PID...]      Show runtime status of one or more units
      show [PATTERN...|JOB...]        Show properties of one or more
                                      units/jobs or the manager
      cat PATTERN...                  Show files and drop-ins of one or more units
      set-property NAME ASSIGNMENT... Sets one or more properties of a unit
      help PATTERN...|PID...          Show manual for one or more units
      reset-failed [PATTERN...]       Reset failed state for all, one, or more
                                      units
      list-dependencies [NAME]        Recursively show units which are required
                                      or wanted by this unit or by which this
                                      unit is required or wanted
    Unit File Commands:
      list-unit-files [PATTERN...]    List installed unit files
      enable NAME...                  Enable one or more unit files
      disable NAME...                 Disable one or more unit files
      reenable NAME...                Reenable one or more unit files
      preset NAME...                  Enable/disable one or more unit files
                                      based on preset configuration
      preset-all                      Enable/disable all unit files based on
                                      preset configuration
      is-enabled NAME...              Check whether unit files are enabled
      mask NAME...                    Mask one or more units
      unmask NAME...                  Unmask one or more units
      link PATH...                    Link one or more units files into
                                      the search path
      add-wants TARGET NAME...        Add 'Wants' dependency for the target
                                      on specified one or more units
      add-requires TARGET NAME...     Add 'Requires' dependency for the target
                                      on specified one or more units
      edit NAME...                    Edit one or more unit files
      get-default                     Get the name of the default target
      set-default NAME                Set the default target
    Machine Commands:
      list-machines [PATTERN...]      List local containers and host
    Job Commands:
      list-jobs [PATTERN...]          List jobs
      cancel [JOB...]                 Cancel all, one, or more jobs
    Snapshot Commands:
      snapshot [NAME]                 Create a snapshot
      delete NAME...                  Remove one or more snapshots
    Environment Commands:
      show-environment                Dump environment
      set-environment NAME=VALUE...   Set one or more environment variables
      unset-environment NAME...       Unset one or more environment variables
      import-environment [NAME...]    Import all or some environment variables
    Manager Lifecycle Commands:
      daemon-reload                   Reload systemd manager configuration
      daemon-reexec                   Reexecute systemd manager
    System Commands:
      is-system-running               Check whether system is fully running
      default                         Enter system default mode
      rescue                          Enter system rescue mode
      emergency                       Enter system emergency mode
      halt                            Shut down and halt the system
      poweroff                        Shut down and power-off the system
      reboot [ARG]                    Shut down and reboot the system
      kexec                           Shut down and reboot the system with kexec
      exit                            Request user instance exit
      switch-root ROOT [INIT]         Change to a different root file system
      suspend                         Suspend the system
      hibernate                       Hibernate the system
      hybrid-sleep                    Hibernate and suspend the system
    root@https11qkr:/#
    - end -
    [ 추가 정보 ... 더보기) ]
    뷰PDF 1,2



    office view

    관련자료

    댓글목록

    profile_image

    체리님의 댓글

    no_profile 체리 쪽지보내기 메일보내기 자기소개 아이디로 검색 전체게시물 아이피 (58.♡.31.2) 작성일

    gg

    profile_image

    ZARD님의 댓글

    no_profile ZARD 쪽지보내기 메일보내기 자기소개 아이디로 검색 전체게시물 아이피 (1.♡.131.8) 작성일

    명령어 덕분에 에러 해결했습니다.




    • 일간 조회수
        • 게시물이 없습니다.
    • 주간 조회수
        • 게시물이 없습니다.
    • 월간 조회수
        • 게시물이 없습니다.


    Total 1,746 / 9 Page
    [ ● 쉴드TV 업데이트 SE9.0에서 알려지고 보고된 문제와 Nvidia 8로 다운그레이드 방법 ] 댓글 1

    ● 쉴드TV 업데이트 SE9.0에서 알려지고 보고된 문제와 Nvidia 8로 다운그레이드 방법<쉴드TV 포럼에 올라온 원문구글번역 내용입…

    [ ● 시놀로지 dsm 7.0 putty 명령어 systemctl로 저의 시스템 동작상태 및 ??? 명령어를 … ] 댓글 2

    ● 시놀로지 dsm 7.0 putty 명령어systemctl로 저의 시스템 동작상태 및 ??? 명령어를 실행 확인 으로 실행 중지 재시작 명령 …

    [ ● 나의 synoinfo.conf 설정 값 확인하여 설정값 변경 작업 준비 ] 댓글 5

    ● 나의 synoinfo.conf 설정 값 확인하여 설정값 변경 작업 준비현재 변경 없이 나의 구성어렵네요변경내용 grub.cfg 변경만으로 무…

    [ ● 12/15 redpill 빌드 작업 log 파일 생성 날자 시간 저장 하기 및 ??_redpill_bui… ] 댓글 20

    ●redpill 빌드 작업 log 파일 생성 날자 시간 저장 하기및 ??redpill_build_2021-12-15T??.log 작업 내용 저장…

    [ ● 시놀로지 HDD 저장소 관리자에 시스템 파티션 실패함 (정상) 일때 복구 방법 ]

    ● 시놀로지 HDD 저장소 관리자에 시스템 파티션 실패함 (정상) 일때 복구 방법▶ 문제증상 및 복구 > 개요에 복구 메뉴 있음추정 문제원…

    [ ● vCenter 없이 ESXi 6.7을 7.0으로 업그레이드하는 방법 ]

    ESXi 7.0에서 지원되지 않는 공급업체 하드웨어 VIB가 호스트에 설치되어 있을 수 있으므로 이러한 VIB가 업그레이드 프로세스를 차단할 수…

    [ ● 정보) esxi에 vib파일로 된 드라이버 설치방법. ]

    ●esxi에 vib파일로 된 드라이버 설치방법.파일이름이 driver.vib 라고 할 경우..1. web에서ESXi 접속2. 유지보수 모드로 변…

    [ ● 1번째)Proxmox ( PVE)에서 xpenology redpill dsm7.0 설치 테스트2 ] 댓글 2

    ●Proxmox ( PVE)에서 xpenology redpill dsm7.0 설치 테스트2기본 설치 방법다운로드https://www.proxmo…

    [ 실패● Proxmox ( PVE)에서 xpenology redpill dsm7.0 설치 테스트 ]

    ● Proxmox PVE 에서 xpenology redpill dsm7.0 설치 테스트 기본 VM 구성 xpenology 설치하기자신만을 설정 …

    [ ★★★ Proxmox 정보 및 PVE 다운로드 하여 설치 테스트 준비 성공 ] 댓글 1

    ●Proxmox 정보 및PVE다운로드 하여 설치 테스트 준비 성공우리는 귀하의 서버 관리를 단순화하기 위해 강력하고 효율적인 오픈 소스 소프트웨…

    [ ● 정보 [20211205 업데이트] DSM7.0.1 온라인 컴파일(도움 없이 컴파일 3분), eSATA 마… ] 댓글 2

    ● 정보[20211205 업데이트] DSM7.0.1 온라인 컴파일(도움 없이 컴파일 3분), eSATA 마운트, 셧다운 및 기타 드라이버 추가,…

    [ ● pve 환경 직렬 포트 자습서의 Synology ]

    ●pve 환경 직렬 포트 자습서의 Synology [KVM]ProxMox 설명이네요 시놀로지는 시작할 때마다 어둡고 움직이지 않고 리눅스 시작 …

    [ ● 정보)Synology 7.0 시스템의 Synology Photos는 얼굴 인식 패치를 지원합니다 ]

    ● 정보)Synology 7.0 시스템의 Synology Photos는 얼굴 인식 패치를 지원합니다 Synology 7.0 시스템 지원에서 Sy…

    [ ● redpill boot loader dsm7.0 mac address 설정시 mac을 2개 설정시 인식못… ]

    ● redpill boot loader dsm7.0 mac address 설정시 mac을 2개 설정시 인식못하고 1개로 설정시 접속 상태 확인-…

    [ ● plex 영상 원본품질 재생으로 로컬에서 영상을 원본으로 시청하기 ] 댓글 1

    ●plex 영상 원본품질 재생으로로컬에서 영상을 원본으로 시청하기설치 : pc 및 시놀로지nas 설치시청 : plex web에서 실행 확인후 주…


    ♥간단_메모글♥


    최근글


    새댓글



    PHP 안에 HTML ☞ 홈페이지 화면갱신 시간은 ♨
    ▶ 2024-03-29 02:24:21

    오늘의 홈 현황


    • 현재 접속자♨ 264 명
    • 오늘 가입자※ 2 명
    • 어제 가입자※ 10 명
    • 주간 가입자※ 29 명
    • 오늘 방문자 855 명
    • 어제 방문자 2,611 명
    • 최대 방문자 13,042 명
    • 전체 방문자 4,240,800 명
    • 전체 게시물※ 8,482 개
    • 전체 댓글수※ 24,395 개
    • 전체 회원수 10,846 명

    QR코드


    ☞ 사진기로 촬영하시면 방문링크 됩니다

    알림 0








    최신글↑