● HA작업) esphome esp32 network fail not connection No route to host

● HA작업) esphome esp32 network fail not connection  No route to host

ERROR Connecting to 192.168.0.72:3232 failed: [Errno 113] No route to host

죽은 esp23

https://community.home-assistant.io/t/esphome-manual-ip-errno-113/143561/12

    static_ip: 192.168.1.75

    gateway: 192.168.1.1

    subnet: 255.255.255.0

Install temp.yaml

INFO ESPHome 2023.12.9

INFO Reading configuration /config/esphome/temp.yaml...

INFO Generating C++ source...

INFO Compiling app...

Processing temp (board: esp32dev; framework: arduino; platform: platformio/espressif32@5.4.0)

--------------------------------------------------------------------------------

HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash

 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5

Dependency Graph

|-- AsyncTCP-esphome @ 2.0.1

|-- WiFi @ 2.0.0

|-- FS @ 2.0.0

|-- Update @ 2.0.0

|-- ESPAsyncWebServer-esphome @ 3.1.0

|-- DNSServer @ 2.0.0

|-- ESPmDNS @ 2.0.0

|-- noise-c @ 0.1.4

Compiling .pioenvs/temp/src/main.cpp.o

Linking .pioenvs/temp/firmware.elf

RAM:   [=         ]  12.4% (used 40592 bytes from 327680 bytes)

Flash: [=====     ]  49.1% (used 901021 bytes from 1835008 bytes)

Building .pioenvs/temp/firmware.bin

Creating esp32 image...

Successfully created esp32 image.

esp32_create_combined_bin([".pioenvs/temp/firmware.bin"], [".pioenvs/temp/firmware.elf"])

Wrote 0xed630 bytes to file /data/build/temp/.pioenvs/temp/firmware-factory.bin, ready to flash to offset 0x0

========================= [SUCCESS] Took 14.89 seconds =========================

INFO Successfully compiled program.

INFO Connecting to 192.168.0.72

ERROR Connecting to 192.168.0.72:3232 failed: [Errno 113] No route to host

☞ https://11q.kr 에 등록된 자료 입니다. ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다♠