● ha작업)esp32 초기 esphome 기본 설치후 단품  설정작업 기본소스

구입 제폼 > 쿠팡 국내 구입 제품

아두이노 ESP32 ESP-32 ESP32-WROOM-32 30PIN 2코어 와이파이-WIFI 블루투스-BlueTooth USB C-Type 0.1%의 비밀

https://www.coupang.com/vp/products/6661557960?

기본 설치 영상 정보 > https://www.youtube.com/watch?v=7PoUWszwaFk

구성> 초기 단품

설치 작업 >esphome > 기기 추가

적용 소스 > 기본 단품에 설절하드웨어  + 핸드폰추적 > ble 추가 작업

esphome:
  name: "esp32-wroom-32-30pin"
  friendly_name: esp32_wroom_32_30pin
esp32:
  board: esp32dev
  framework:
    type: arduino
# Enable logging
logger:
# Enable Home Assistant API
api:
  encryption:
    key: "qA8xG6A2GaF7KqwㅌㅌㅌㅌㅌㅌDe2VxY/DA+FrrE="
ota:
  password: "d296a80ce1c3ㅌㅌㅌㅌㅌㅌㅌfafe34ee35"
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  # ======================================
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  # add install after setting 1
  power_save_mode: LIGHT  
  manual_ip:
    static_ip: 192.168.0.119
    gateway: 192.168.0.1
    subnet: 255.255.255.0
    dns1: 8.8.8.8
    dns2: 8.8.4.4
  # ======================================
  ap:
    ssid: "Esp32-Woom Fallback Hotspot"
    password: "BodMG8v8lv1M"
captive_portal:
  # ======================================
# 초기 설치후 연결 작업 후에 
# captive_portal: 다음에 붙여넣습니다.
  # ======================================


time:
  - platform: homeassistant
    id: ha_time
# =================
debug:
  update_interval: 5s
sensor:
  - platform: uptime
    name: Uptime Sensor    
    update_interval: 1s
    
  - platform: wifi_signal # Reports the WiFi signal strength/RSSI in dB
    name: "WiFi Signal dB"
    id: wifi_signal_db
    update_interval: 60s
    entity_category: "diagnostic"
  - platform: copy # Reports the WiFi signal strength in %
    source_id: wifi_signal_db
    name: "WiFi Signal Percent"
    filters:
      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
    unit_of_measurement: "Signal %"
    entity_category: "diagnostic"
    device_class: ""
   
text_sensor:
  - platform: version
    name: "Install Restart Time ESPHome Version"
  - platform: template
    name: Uptime
    update_interval: 1s
    lambda: |-
      auto s = millis() / 1000;
      return str_snprintf("%02d:%02d:%02d:%02d", 11, s / 86400, s / 3600 % 24, s / 60 % 60, s % 60);
  - platform: debug
    device:
      name: "Device Info"
    reset_reason:
      name: "Reset Reason"
  - platform: wifi_info
    ip_address:
      name: Address
      id: ip
    ssid:
      name: SSID
    mac_address:
      name: Mac
switch:
  - platform: restart
    name: "Restart Node"
# ========================================================
# wifi power_save_mode: LIGHT
bluetooth_proxy:
  active: true
esp32_ble_tracker:
  scan_parameters:  # 휴대폰 blu 인식 정보
    interval: 1100ms  # 스캔 간격을 더 자주 스캔하도록 변경
    window: 1100ms     # 스캔 창을 더 넓게 설정하여 더 많은 장치를 감지할 수 있도록 함
    active: true     # 활성 스캔 활성화
binary_sensor:
  - platform: ble_presence
    ibeacon_uuid: 'a26fbca9-870e-4293-xxxxxx-0defc4e'
    name: "myphone_9045"
    id: myphone
    timeout: 45s
  
  - platform: ble_presence
    ibeacon_uuid: '7cad13d3-e06e-4493-xxxxxx-2a27e46695c'
    name: "mywife_5763"
    id: mywife
    timeout: 45s
  
  - platform: ble_presence
    ibeacon_uuid: '4f36ad4e-d3bb-4ee-xxxxxx-f9de146b5'
    name: "home_phone_8655"
    timeout: 45s

==================  기본 단품 설정 입니다

☞ https://11q.kr 에 등록된 자료 입니다. ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다♠