20230624_0211_00  작업중

댓글내용 확인

lambda: |-
      // Print 0 at the top left
      it.print("0");

      // Print 1 at the second row and second column.
      it.print(1, 1, "1");

      // Let's write a sensor value (let's assume it's 42.1)
      it.printf("%.1f", id(my_sensor).state);
      // Result: "42.1" (the dot will appear on the segment showing "2")

      // Print a right-padded sensor value with 0 digits after the decimal
      it.printf("Sensor value: %8.0f", id(my_sensor).state);
      // Result: "Sensor value:      42"

      // Print the current time
      it.strftime("It is %H:%M on %d.%m.%Y", id(my_time).now());
      // Result for 10:06 on august 21st 2018 -> "It is 10:06 on 21.08.2018"

ESP32 응용> 코드 버튼 ON OFF 작동 방식 예제 설명
https://randomnerdtutorials.com/esp32-digital-inputs-outputs-arduino/

댓글내용 확인

기본설치후 추가 내용
============

# ===============================================================
binary_sensor:
  - platform: gpio
    pin: GPIO2
    name: "PIR_Sensor"
    device_class: motion
    id: pin_d2

i2c:
  scl: GPIO22
  sda: GPIO21

time:
  - platform: homeassistant
    id: homeassistant_time   
    timezone: Asia/Seoul
 
sensor:
  - platform: bme680
    temperature:
      name: "BME680 Temperature"
      oversampling: 16x
    pressure:
      name: "BME680 Pressure"
    humidity:
      name: "BME680 Humidity"
    gas_resistance:
      name: "BME680 Gas Resistance"
    address: 0x77
    update_interval: 60s 
  - platform: homeassistant
    id: temperature
    # entity_id: sensor.onseubdogye_temperature
    entity_id: sensor.guest_br_node_bme680_temperature
    internal: true
  - platform: homeassistant
    id: humidity
    # entity_id: sensor.onseubdogye_humidity
    entity_id: sensor.guest_br_node_bme680_humidity
    internal: true 

   
# sensor.bme680_bme680_temperature
# sensor.bme680_bme680_humidity
# sensor.guest_br_node_bme680_temperature
# sensor.guest_br_node_bme680_humidity

display:
  - platform: lcd_pcf8574
    dimensions: 20x4
    address: 0x27
    id: mydisplay
    user_characters:
      - position: 1
        data:
          - 0b00000
          - 0b00010
          - 0b00101
          - 0b00010
          - 0b00000
          - 0b00000
          - 0b00000
          - 0b00000
      - position: 2
        data:
          - 0b01000
          - 0b10101
          - 0b01011
          - 0b00110
          - 0b01100
          - 0b11010
          - 0b10101
          - 0b00110
    lambda: |-
      it.print(0, 0, "Home Assistant_8574");
      it.strftime(0, 1, "Date > %Y-%b-%d", id(homeassistant_time).now());
      it.strftime(0, 2, "Time > %H:%M %a", id(homeassistant_time).now());
      it.printf(0, 3, "Temp > %.1f C", id(temperature).state);
      it.printf(11, 3, "\x01");
      it.printf(14, 3, "%.1f ", id(humidity).state);
      it.printf(18, 3, "\x02");

# https://esphome.io/components/display/lcd_display.html
# https://esphome.io/components/sensor/bme680.html?highlight=bme680
# 20230722_1802_37

esphome esp32 pin정보 배열사진

●HA작업) lcd_pcf8574 Component LCD 모듈 HAOS에 연결 및 PIR_Sensor 구성및 감도 감지후 해체 시간 조정 하기
s:\esphome\dispay-ip201-temp1.yaml 최종파일 보관

pcf8574  재구성 2024_0126_1355_19

추가정보)
ESPHome을 갖춘 밝기 조절 가능 PCF8574 LCD 디스플레이
https://community.home-assistant.io/t/dimmable-pcf8574-lcd-display-with-esphome/272308

# temp1
esphome:
  name: "display-book-room" # ID
  friendly_name: "display_book_room_PIR_Sensor" # name
esp32:
  board: esp32dev
  framework:
    type: arduino
# 11q.kr/www/bbs/board.php?bo_table=co3&wr_id=1062
# Enable logging
logger:
  # baud_rate: 9600
  # baud_rate: 0
  level: DEBUG #기본값
  # level: VERBOSE #사용하지 않는 패킷만 출력
  # level: VERY_VERBOSE
  #전체 패킷 출력 <<=== 초기설치시 옵션사용

# Enable Home Assistant API
api:
  encryption:
    key: "wq8XuzMYpmw2ynd32uhEHm2KbQh4DO64+sX3P0zPimI="

ota:
  password: "62369d8ccd0bfd5f28950d4778cd9c40"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  manual_ip:
    static_ip: 192.168.0.201
    gateway: 192.168.0.1
    subnet: 255.255.255.0
    dns1: 8.8.8.8
    dns2: 8.8.4.4
  ap:
    ssid: "Sensor Fallback Hotspot"
    password: "tqLb2DhNbREz"

captive_portal:
# ==============================
# 기기 추가부분
# pin 번호 > https://11q.kr/www/bbs/board.php?bo_table=co3&wr_id=1213    inverted: true
# # ==============================
time:
  - platform: homeassistant
    id: homeassistant_time   
    timezone: Asia/Seoul


# 9999999999999999999999999999999999999999999   
i2c:
  sda: GPIO21
  scl: GPIO22
  scan: True
  id: bus_a
 

# backlight  20240110_1154_28
# ========================
output:
  - platform: ledc
    pin: GPIO12
    id: backlight
    inverted: true
  # backlight_GPIO12
# ==========
# light:
light:
# 20240110_1205_13  88888888888888888888
  - platform: monochromatic
    output: backlight
    name: "LCD Display Backlight"
    id: light_backlight
    restore_mode: ALWAYS_ON
 
# 99999999999999999999999999999999999999

binary_sensor:
  - platform: gpio
    pin: GPIO2
    name: "PIR_Sensor"
    device_class: motion
    id: pin_d2
   
# 8888888888888888888888888888888
  - platform: homeassistant   
    id: backlight_on
    entity_id: input_number.backlight_level
    internal: true
# 9999999999999999999999999999999999999999999

sensor:
# https://esphome.io/components/sensor/wifi_signal.html
  - platform: wifi_signal # Reports the WiFi signal strength/RSSI in dB
    name: "WiFi Signal dB"
    id: wifi_signal_db
    update_interval: 60s
    entity_category: "diagnostic"

  - platform: copy # Reports the WiFi signal strength in %
    source_id: wifi_signal_db
    name: "WiFi Signal Percent"
    filters:
      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
    unit_of_measurement: "Signal %"
    entity_category: "diagnostic"
    device_class: ""
# =======================================    # 
  - platform: bme680
    temperature:
      name: "Temperature"
      filters:
      - calibrate_linear:
        method: least_squares
        datapoints:
          - 0.0 -> 1.0
          - 25.0 -> 22.0
    pressure:
      name: "Pressure"
    humidity:
      name: "Humidity"
      filters:
        - calibrate_linear:
          - 0 -> 0
          - 0.500 -> 0.550     
    gas_resistance:
      name: "Gas Resistance"
    address: 0x77
    update_interval: 60s
# ========================================
  - platform: homeassistant
    id: temperature
    entity_id: sensor.esphome1_temperature
    internal: true

  - platform: homeassistant
    id: humidity
    entity_id: sensor.esphome1_humidity
    internal: true

  - platform: homeassistant
    id: raw
    entity_id: sensor.energymeterip67_raw
    internal: true

  - platform: homeassistant
    id: current
    entity_id: sensor.energy1_electricity_usage_current67_a
    internal: true 
 
  - platform: homeassistant
    id: power
    entity_id: sensor.energy1_electricity_usage_power67_w
    internal: true 
 
  - platform: homeassistant
    id: daily_energy
    entity_id: sensor.energy1_electricity_usage_power67_total_daily
    internal: true




text_sensor:
  - platform: version
    name: "Mortara - ESPHome Version"

  - platform: homeassistant   
    id: display_line_2
    entity_id: input_text.mortara_line_2
    internal: true
  - platform: homeassistant   
    id: display_line_3
    entity_id: input_text.mortara_line_3
    internal: true   
  - platform: homeassistant   
    id: display_line_4
    entity_id: input_text.mortara_line_4
    internal: true
 
  - platform: homeassistant   
    id: display_backlight
    entity_id: input_number.backlight_level
    internal: true
    on_value:
      then:
        - output.turn_on: backlight
        - output.set_level:
            id: backlight
            level: !lambda |-
              return atoi(id(display_backlight).state.c_str()) / 100.0;
# ---------------
# text_sensor:
  - platform: template
    name: Uptime
    update_interval: 1s
    lambda: |-
      auto s = millis() / 1000;
      return str_snprintf("%02d:%02d:%02d:%02d", 11, s / 86400, s / 3600 % 24, s / 60 % 60, s % 60);

# -------------------
# 20240110_1554_39

# ========================
display:
  - platform: lcd_pcf8574
    dimensions: 20x4
    address: 0x27
    id: lcd
    update_interval: 0.200s
     
    user_characters:
      - position: 1
        data:
          - 0b00000
          - 0b00010
          - 0b00101
          - 0b00010
          - 0b00000
          - 0b00000
          - 0b00000
          - 0b00000
      - position: 2
        data:
          - 0b01000
          - 0b10101
          - 0b01011
          - 0b00110
          - 0b01100
          - 0b11010
          - 0b10101
          - 0b00110


    lambda: |-
      if(id(light_backlight).current_values.is_on()) {
        id(lcd).backlight();

        it.printf(0, 0, "%.0fdB", id(wifi_signal_db).state);
        it.strftime(5, 0, "> %H:%M-%S %a", id(homeassistant_time).now());
        it.strftime(0, 1, "Date > %Y-%b-%d", id(homeassistant_time).now());
        it.printf(0, 2, "Power> %.0f W,", id(power).state);
        it.printf(14, 2, "A>%.1f", id(current).state);
        it.printf(5, 3, "> %.1f C", id(temperature).state);
        it.printf(11, 3, "\x01");
        it.printf(14, 3, "%.1f ", id(humidity).state);
        it.printf(18, 3, "\x02"); 
          // 모션 감지 상태 확인 및 출력
        if (id(pin_d2).state == 1.0) {
          it.printf(0, 3, "PIR:1");
        } else {
          it.printf(0, 3, "PIR:0");
        }
      } else {
        id(lcd).no_backlight();
      }



# https://esphome.io/components/display/lcd_display.html
# https://esphome.io/components/sensor/bme680.html?highlight=bme680
# https://docs.openenergymonitor.org/electricity-monitoring/ct-sensors/interface-with-arduino.html
# https://www.speaktothegeek.co.uk/2022/08/esphome-ct-clamp-power-and-energy-monitor/
# https://community.home-assistant.io/t/energy-tracking-with-esp32-ct-clamp-sensor-from-an-efergy-elite-1-0r/344002
# https://community.home-assistant.io/t/ct-clamp-sensor-interference-on-esp32-adc/450366/2
# 20230810_1322_51   
# https://community.home-assistant.io/t/dimmable-pcf8574-lcd-display-with-esphome/272308/9
# https://community.home-assistant.io/t/dimmable-pcf8574-lcd-display-with-esphome/272308/7


# ================ sample ===============