11.Nas_1


새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사


●정보 ) redpill tiny core 최근 빌드 정보 소개

♨ 카랜더 일정 : 2022년07월16일
  • 링크

  • 첨부

  • 컨텐츠 정보

    본문

    ●정보 )  redpill tiny core 최근 빌드 소개

    =================================

    redpill tiny core  v0.8.0.3

    정상 빌드후 부팅 화면

    3232235521_1657997847.9009.png


    기본  Tiny core red pill boot loader 다운로드 후 esxi 서버용으로 vmdk 파일로 변경 파일로  변환  부팅 합니다

    Tiny Core Image Build 로 부팅후

    3232235521_1658022885.2393.png

    Ctrl + Alt + F1 으로 터미널 모드로 진입

    ifconfig로 ip 확인

    3232235521_1658022977.8371.png

    외부 pc에서 접속 가능
    tc 암호변경없이 접속은 P@ssw0rd 입니다(0은 숫자)

    tc

    P@ssw0rd

    ===========================

     rploader.sh 도움말

    ----------

    tc@box:~$ ./rploader.sh help

    rploader.sh


    Version : 0.8.0.3

    ----------------------------------------------------------------------------------------

    Usage: ./rploader.sh <action> <platform version> <static or compile module> [extension manager arguments]


    Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, patchdtc,

    satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, postupdate,

    mountshare, version, help


    - build <platform> <option> :

      Build the ???? RedPill LKM and update the loader image for the specified platform version and update

      current loader.


      Valid Options:     static/compile/manual


    - ext <platform> <option> <URL>

      Manage extensions using redpill extension manager.


      Valid Options:  add/force_add/info/remove/update/cleanup/auto . Options after platform


      Example:

      rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json

      or for auto detect use

      rploader.sh ext apollolake-7.0.1-42218 auto


    - download <platform> :

      Download redpill sources only


    - clean :

      Removes all cached and downloaded files and starts over clean


    - update :

      Checks github repo for latest version of rploader, and prompts you download and overwrite


    - listmods <platform>:

      Tries to figure out any required extensions. This usually are device modules


    - serialgen <synomodel> <option> :

      Generates a serial number and mac address for the following platforms

      DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621+


      Valid Options :  realmac , keeps the real mac of interface eth0


    - identifyusb :

      Tries to identify your loader usb stick VID:PID and updates the user_config.json file


    - patchdtc :

      Tries to identify and patch your dtc model for your disk and nvme devices. If you want to have

      your manually edited dts file used convert it to dtb and place it under /home/tc/custom-modules


    - satamap :

      Tries to identify your SataPortMap and DiskIdxMap values and updates the user_config.json file


    - backup :

      Backup and make changes /home/tc changed permanent to your loader disk. Next time you boot,

      your /home will be restored to the current state.


    - backuploader :

      Backup current loader partitions to your TCRP partition


    - restoreloader :

      Restore current loader partitions from your TCRP partition


    - restoresession :

      Restore last user session files. (extensions and user_config.json)


    - mountdsmroot :

      Mount DSM root for manual intervention on DSM root partition


    - postupdate :

      Runs a postupdate process to recreate your rd.gz, zImage and custom.gz for junior to match root


    - mountshare :

      Mounts a remote CIFS working directory


    - version <option>:

      Prints rploader version and if the history option is passed then the version history is listed.


      Valid Options : history, shows rploader release history.


    - help:           Show this page


    Version : 0.8.0.3

    ----------------------------------------------------------------------------------------

    Available platform versions:

    ----------------------------------------------------------------------------------------

    apollolake-7.0-41890

    apollolake-7.0.1-42218

    apollolake-7.0.1-42218-JUN

    apollolake-7.1.0-42621

    apollolake-7.1.0-42661

    broadwell-7.0.1-42218

    broadwell-7.0.1-42218-JUN

    broadwell-7.1.0-42621

    broadwell-7.1.0-42661

    broadwellnk-7.0.1-42218

    broadwellnk-7.0.1-42218-JUN

    broadwellnk-7.1.0-42621

    broadwellnk-7.1.0-42661

    bromolow-7.0.1-42218

    bromolow-7.0.1-42218-JUN

    bromolow-7.1.0-42621

    bromolow-7.1.0-42661

    denverton-7.0.1-42218

    denverton-7.0.1-42218-JUN

    denverton-7.1.0-42621

    denverton-7.1.0-42661

    ds2422p-7.0.1-42218-JUN

    geminilake-7.0.1-42218

    geminilake-7.0.1-42218-JUN

    geminilake-7.1.0-42621

    geminilake-7.1.0-42661

    v1000-7.0.1-42218

    v1000-7.0.1-42218-JUN

    v1000-7.1.0-42621

    v1000-7.1.0-42661

    ----------------------------------------------------------------------------------------

    Check custom_config.json for platform settings.

    tc@box:~$


    ==============

     부팅후 작업 입니다
     ============

     ./rploader.sh update

     ./rploader.sh fullupgrade

      ./rploader.sh clean


    빌드

    ./rploader.sh satamap

     ./rploader.sh  serialgen DS920+

    ./rploader.sh build geminilake-7.1.0-42621


    빌드후 로더 부탕 메뉴 설정 확인
    tce-load -w -i nano.tcz
    tce-load -w -i mc
    sudo mount /mnt/sda1
    nano /mnt/sda1/boot/grub/grub.cfg
    cat /mnt/sda1/boot/grub/grub.cfg


    종료하기

     exitcheck.sh poweroff


    재부팅

    sudo reboot

    ==========  빌드방법 ===========

    방법1)

    ./rploader.sh build geminilake-7.1.0-42621

    방법2)

    myv.sh



    최근 my.sh의  기능 향상으로 빌드가 편해 졌습니다

     다운로드

    tc@box:~$ cat my_build_update.sh

    echo " =============================

    Posted Saturday at 09:37 PM

    Release DS1520+ jun mode m shell.

    With @jumkey's help, it's done.

    DS1520+ is a 5-bay product with one more disk bay than DS920+.

    You can think of it as a similar model to the DS920+.

    Like the DS920+, it supports transcoding and is a DTC-based model.

    It is a model that can be built only in the M shell.


    You can use the build command as below.

    ./my.sh DS1520+J


    For VMs that require additional ext , etc., it is as follows.

    ./myv.sh DS1520+J

    For first-time users, please download and install it in advance as shown below.

    ======================================== "

    curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz" --output my.sh.gz; tar -zxvf my.sh.gz;

    curl --location "https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/myv.sh.gz" --output myv.sh.gz; tar -zxvf myv.sh.gz;


    ls -lrt m*.sh

    tc@box:~$

    ==========
     빌드
    ./myc.sh 
    ================
    tc@box:~$ ./myv.sh
    Checking Internet Access -> OK
    Checking if a newer mshell version exists on the repo -> Version is current
    myv.sh

    ----------------------------------------------------------------------------------------
    Usage: ./myv.sh <Synology Model Name> <Options>

    Options: postupdate, noconfig, noclean, manual

    - postupdate : Option to patch the restore loop after applying DSM 7.1.0-42661 Update 2, no additional build required.

    - noconfig: SKIP automatic detection change processing such as SN/Mac/Vid/Pid/SataPortMap of user_config.json file.

    - noclean: SKIP the ????   RedPill LKM/LOAD directory without clearing it with the Clean command.
               However, delete the Cache directory and loader.img.

    - manual: Options for manual extension processing and manual dtc processing in build action (skipping extension auto detection)

    Please type Synology Model Name after ./myv.sh

    - for jot mode

    ./myv.sh DS918+
    ./myv.sh DS3617xs
    ./myv.sh DS3615xs
    ./myv.sh DS3622xs+
    ./myv.sh DVA3221
    ./myv.sh DS920+
    ./myv.sh DS1621+
    ./myv.sh DS2422+
    ./myv.sh DVA1622
    ./myv.sh DS1520+ (Not Suppoted)
    ./myv.sh FS2500 (Not Suppoted)

    - for jun mode

    ./myv.sh DS918+J
    ./myv.sh DS3617xsJ
    ./myv.sh DS3615xsJ
    ./myv.sh DS3622xs+J
    ./myv.sh DVA3221J
    ./myv.sh DS920+J
    ./myv.sh DS1621+J
    ./myv.sh DS2422+J
    ./myv.sh DVA1622J (Not Suppoted)
    ./myv.sh DS1520+J
    ./myv.sh FS2500J

    tc@box:~$
    ==================
    빌드
    ./myc.sh 
    ./myv.sh  ds3622sx+j
    3232235521_1657999347.9411.png

    저의 Esxi 서버의 부팅 랜 응답이 않되어 빌드후  mac 주소 변경 해야 합니다
     mac2=XXYYXXYYXXYY mac1=XXYYXXYYXXYY 


    tc@box:~$ cat grub_cfg_mount.sh
    echo grub_cfg_mount.sh
    tce-load -w -i nano.tcz
    tce-load -w -i mc
    sudo mount /mnt/sda1
    nano /mnt/sda1/boot/grub/grub.cfg
    cat /mnt/sda1/boot/grub/grub.cfg

    tc@box:~$
     mac2=XXYYXXYYXXYY mac1=XXYYXXYYXXYY 
    로변경
    3232235521_1657998765.3769.png


    리부팅
    3232235521_1657999282.6707.png

    정상빌드후 부팅 .

    3232235521_1657999405.761.png

    3232235521_1657999432.3469.png


    ☞ https://11q.kr 에 등록된 자료 입니다. ♠ 정보찾아 공유 드리며 출처는 링크 참조 바랍니다♠1.png

    [ 추가 정보 ... 더보기) ]
    뷰PDF 1,2



    office view

    관련자료

    댓글목록

    등록된 댓글이 없습니다.

    목록

    새창 작성 수정 목록 링크 Edit G카랜다 HDD HDD HDD 게시물 주소 복사




    Total 1,676 / 18 Page
    [ ** 시놀로지 도커용 Tvheadend 자동설치 작업 => 도커의 좋은점 바로 삭제후 간단히 재설치 가능 ] 댓글 5

    ** 시놀로지 도커용 Tvheadend 자동설치 작업 => 도커의 좋은점 바로 삭제후 간단히 재설치 가능추가없이 tv_grab_klive …

    [ 포토샵으로 사각형 모서리 라운드 둥굴게 사진 만들기 ]

    포토샵으로 사각형 모서리라운드둥굴게 사진 만들기포토샵으로 사각형 모서리 둥글게 만들기! 간단한 방법조건) 필수레이어 복제후 사본만 선택 사본만 …

    [ ● kodi strm maker로 생성한 *strm* 영화제목 변경하기/지우기 [SQL] 데이터 치환(변경)… ]

    ● kodi strm maker로 생성한*strm* 영화제목 변경하기/지우기[SQL] 데이터 치환(변경)하기첨부파일 경로가 변경이 되었거나 그 …

    [ ● Synology DSM 7용 opkg(Entware)를 통해 패키지 설치 ]

    ●Synology DSM 7용 opkg(Entware)를 통해 패키지 설치시놀로지 dsm 패캐지소스 추가부분 설치가 안되는 증상 나타남내 Syn…

    [ ● 패키지 업로드 dsm7.0 에서 파일 형식이 올바르지 않습니다. 패키지 개발자에게 문의 하십시요 ...… ]

    ● 패키지 업로드 dsm7.0 에서 파일 형식이 올바르지 않습니다. 패키지 개발자에게 문의 하십시요 ...설치 불가 ☞https://11q.kr…

    [ 7.0버전 관련무 내용 으로 봉인)기본인식 //에러 ● esxi 서버의 vm생성 cpu 가상화가 아닌 일… ]

    ● esxi 서버의 vm생성 cpu 가상화가 아닌 일반 PC로 인식되는것을 확인 한 사례7.0버전에서 적용유무 확인 ,적용 불가능하며 기본 인식…

    [ ● pve 환경 직렬 포트 자습서의 Synology ]

    ●pve 환경 직렬 포트 자습서의 Synology [KVM]ProxMox 설명이네요 시놀로지는 시작할 때마다 어둡고 움직이지 않고 리눅스 시작 …

    [ ● 저의 Esxi서버 7.0.2 메인서버 DS3615xs dsm7.1 서버전환 완료 ]

    ● 저의 Esxi서버 7.0.2 메인서버 DS3615xs dsm7.1 서버전환 완료기존 dsm7.0 에서 tinycore bootloader 0…

    [ ● 듀얼랜 활용법 참고자료 활용 테스트(저의 esxi 서버에서는 효과가 없다) ]

    ●듀얼랜 활용법 참고자료 활용 테스트1차 설정저의 esxi 서버에서는 효과가 없다입니다2차 점검esxi 서버의 랜설정 다른 카드이름으로 필요처음…

    [ ● 시놀로지 도커 nextcloud 설치 2단계) 크롬 접속 https 주의요함 및 접속 불가로 let… ]

    ● 시놀로지 도커 nextcloud 설치 2단계) 크롬 접속 https 주의요함 및 접속 불가로 lets 인증서 연결하기시놀로지 도커 설치 이름…

    [ ● 헤놀로지 esxi 서버 스토리지 풀1 경고및 초기화 되지 않음 -- 발생경위 ]

    ● 헤놀로지 esxi 서버 스토리지 풀1 경고및 초기화 되지 않음기존 사용했던 빌더에서● tinycore-redpill.v0.8.0 빌드 작업)…

    [ ● Synology NAS의 Let 's Encrypt에서 인증서를 어떻게 얻습니까? ]

    ●Synology NAS의 Let 's Encrypt에서 인증서를 어떻게 얻습니까? 이 문서에서는 Synology NAS의 Let 's Encr…

    [ ● 시놀로지작업)duckdns.org 바로등록 시놀로지 dsm7.0 에서 등록 사용하기 ] 댓글 1

    ● duckdns.org에서 dns 바로등록 시놀로지 dsm7.0 에서 등록 사용하기등록 상태'생성하기 는 바로 등록 됩니다 > 몇초면 생…

    [ ● 시놀로지작업) NPM 을 이용한 서브도메인 sub.aaa.duckdns.org를 이용한 시놀로지 역방향… ]

    ● 시놀로지작업) NPM 을 이용한 서브도메인 sub.aaa.duckdns.org를 이용한 시놀로지 역방향 프록시 적용 https;// 서브 도…

    [ ● 영상분석)시놀로지NAS에 네임서버 한방에 쉽게 셋팅하는 영상입니다 ]

    ● 영상분석)시놀로지NAS에 네임서버 한방에 쉽게 셋팅하는 영상입니다https://www.youtube.com/watch?v=oMQSTtHGEB…


    ♥간단_메모글♥


    최근글


    새댓글



    PHP 안에 HTML ☞ 홈페이지 화면갱신 시간은 ♨
    ▶ 2024-06-26 23:37:15

    오늘의 홈 현황


    • 현재 접속자♨ 769 명
    • 오늘 가입자※ 2 명
    • 어제 가입자※ 2 명
    • 주간 가입자※ 8 명
    • 오늘 방문자 2,405 명
    • 어제 방문자 2,051 명
    • 최대 방문자 13,042 명
    • 전체 방문자 4,397,012 명
    • 전체 게시물※ 8,658 개
    • 전체 댓글수※ 24,773 개
    • 전체 회원수 11,070 명

    QR코드


    ☞ QR코드 스캔은 kakao앱 자체 QR코드

    알림 0








    최신글↑