Notes:
- These are built with kernels from the latest Beelink GT-King (Amlogic S922X w/ w200 reference board) and Beelink GT1mini (Amlogic S905X2 w/ u212 reference board) firmware, but will probably work on any device based on the same reference boards.
- The signed .ZIP files are suitable for installation with stock OEM recovery, but they use platform test keys and so might not work on builds requiring release keys.
- If your device uses Android Verified Boot, there are additional measures you must take to successfully boot with a custom recovery partition.
- This is unofficial and unsupported, so the usual caveats apply. Since we don't flash the bootloader, you should be able recover from any problems...but nothing is guaranteed.
Not working:
- MTP & ADB
Downloads:
S922X (Amlogic w400 reference board):S905X2 (Amlogic u212 reference board):
Change Log:
v3.3.1-0: (20191111)
- Switched from KM9 to GT1mini kernel
- Initial release
Instructions:
From OEM update app:
- Copy .ZIP file to flash drive or microSD card
- Open the UPDATE app and select Local Update
- Select the .ZIP file and confirm
- Note: No need to wipe data or cache
- Open terminal window (e.g. Terminal Emulator for Android by Jack Palevich)
- Navigate to location of .IMG file
- Type the following:Code:
su dd if=twrp.img of=/dev/block/recovery reboot recovery
- Copy .IMG file to flash drive or microSD card
- Click Install->Select Storage and pick the external drive
- Click Install Image and select the .IMG file
- Select Recovery partition and swipe to install
- Reboot to Recovery
Source:
Donations:
- Your support is always appreciated! Just click here.
● 시놀로지 액티브 백업, 매번 윈도우 재설치 & 세팅이 필요없는 이유 (신나따 Ep.03) _조회수_댓글수(
13677
● 시놀로지와 pc의 파일 복사 속도 높이기 SMB 멀티 채널을 사용하여 나스 속도를 증가시키는 방… _조회수_댓글수(
13581
● 우리집 외부 아이피 인터넷 연결에서 열린 포트 식별 확인 하기 _조회수_댓글수(
4450
● ha작업) esxi서버 HDD 용량 키우기 작업 _조회수_댓글수(
4263
● 영상분석)시놀로지NAS에 네임서버 한방에 쉽게 셋팅하는 영상입니다 _조회수_댓글수(
1245